Reamers for sale

[Cloudrepair]

Lowered the price on all.
These reamer all are in good shape some I got used and look good but havent used them.
the others I have used have been used once or twice maybe 3 times.

(6.5 mm saum gap live pilot ptg $100.00. Sold)
(6mm br match 7 solid pilot jgs .262 neck. Sold)
(7mm 08 solid pilot ptg .316 neck. $80.00. Sold )
6mm rem br solid pilot Clymer .272 neck. $80.00.
300 wsm solid pilot Manson .346 neck $80.00.
(280 Ai live pilot rev b missing screw ptg .316 neck $80.00.) Sold per funds)
6.5x47 L solid pilot cip ptg .294 neck $80.00.
(6mm br lapua rev a ptg live pilot .272 neck $100.00Sold)
Plus shipping on all of these will probably only be around ten bucks

 

[wvlongshot]

Is either 6br reamer set up for lapua brass? Any idea on the free bore?

 

[Cloudrepair]

I will try to measure them the best I can the jgs one I think is good for the Lapua brass but I'm sure it will need neck turned not sure on the Clymer they both look to have a .120 free bore not positive.
If there is a standard free bore for 6 br that may be what they are if it is close to what I measured.
I do have a ptg reamer live pilot that I would let go if that is what you would like I know it works perfectly with the lapua brass and wouldn't need to neck turn them.
I will go get it out of the shop and see what it is. it has only been used once and would need $120 for it

 

[Cloudrepair]

The ptg one is marked 6mm br lapua rev a and the free bore is approximately .130 and on a closer look they all seem to be about the same .130

 

[Cloudrepair]

Not positive but the Clymer reamer will probably work well with lapua brass also the shoulder seems to be about a half thousand smaller. It is marked 6mm br rem though so it was probably made for Remington brass

 

[wvlongshot]

Thank you for looking. Too long a free bore for my needs. I'll have to pass.

 

[Cloudrepair]

Ok thanks

 

[jackieschmidt]

On the 280 AI, is that basically a SAAMI spec reamer?

 

[Cloudrepair]

I am not sure it is a rev b and the pt#12177
It has done two chambers. Now that i think more on it i believe it has only done one chamber. I got it from ptg close to same year it was made it is marked 10/16. Within a couple months

 

[Cloudrepair]

Ttt

 

[Cloudrepair]

Ttt

 

[Cloudrepair]

Ttt

 

[Cloudrepair]

Offers excepted.
Make offer if interested in any of these.

 

[Cloudrepair]

Up

 

[Cloudrepair]

Ttt

 

[SCVOJTA]

PM sent

 

[SCVOJTA]

I'll take the 280 AI reamer as per our PM.

 

[Jud96]

Is the 300 WSM reamer still available?

 

[Cloudrepair]

Yes

 

[Jud96]

Yes

Is the 300 WSM SAAMI spec freebore?