Reamer Prints: 25x284, 25 SAUM, 25 PRC

[257Blackjack]

Good evening shooters!

Like all of our Blackjack Spec Reamers we ask Manson and JGS and Clymer to consider these prints released to the public for their own ordering purposes. We just want 25 Cal to grow and shooters be able to enjoy the low recoil performance waiting to be tapped in 25 Cal.

These prints are setup for the 131 ACE (0.345 G7 / 0.674 G1) and for the SA Mags, for mag-fed rifles. For the 25x284 in this case it is just setup to run well and not be set too far out or too far in the neck.

I'll include the 25x47 and 25 Creedmoor reamers in this post as well so folks will have them in an easy place.

We will be picking a new cartridge every month or so to order 10 reamers for so please let us know if there's a cartridge you favor for the 131 ACE!


25 PRC - Easily achieves 3300up to 3400 fps


25 SAUM - 3300-3400 fps



25x284 (my favorite of the three) - 3100-3200 fps



25x47L (2900-2970 fps)

25 Creedmoor



Manson and JGS have these prints. Clymer has 25x47 and 25 Creed on file.

Let us know what else you'd like to see and we will try to add it into the production list.

 

[steve123]

How about 25 Dasher based off Norma Dasher brass now that it's available again, or that new 6GT from GA precision for a base cartridge.

Some of us want the best barrel life we can get out of that 131 Ace and there's no denying the efficiency of these small cases.

.67BC at 2700-2800 still rocks!

 

[257Blackjack]

There are some guys building 25 BR and 25 Dasher. I talked to George about 25 GT but that will be a while out.

25 BR and 25 WSSM testing with common accuracy powders should be done in the next 7-10 days. I'm interested in both but 25x47L is so usable most of my rifles will be in the 47-Creed range.