Reamer dimensions for a 6xc

[Thud]

I am building a 6xc what dimensions are needed for the following;

loaded round is .271 want to turn necks slighty
freebore for 95 flat base and boat tail
lead

using norma 6xc brass 2nd gen
If possible please post reamer drawing or reamer number
Thanks,
Thud

 

[Frankr]

Thud i'll bite. my suggestion would be to talk to DAVE Kiff at pacific tool and gage. he could help you.

the chamber and reamer i'm using with new Norma brass is a .274 neck diameter . with a .104 free bore
1-30 deg lead. Dave set me up with it.
I shoot the Berger 105 VLD and it is in the full length of the neck touching the rifling's .the boat tail is just above the neck shoulder junction, I would call it a short throat. I would think it would work fine with the bullets you want to use. I have no idea why you would want to use 95 gr bullet because you give up a lot of BC over what the 105 class bullets have. Unless you have a 1-9 twist and cant shoot the 105's.
sorry I cant post a print. I can look at it but I cant open the file or do anything with it for some reason. so I cant get it to post.