Re-working a std rem700 trigger

[Craigyboy]

I have a 22-250 rem 700 VSF coming and I know its gonna need the trigger done, anyone got any tips or is there any online instructions to re work the std trigger to something decent. I know most people just buy a new trigger right off the bat but I want to cut back a bit, I am buying far too much these days and it does seem a shame just to discard it straight off the bat, surely it can be made useable for a year or so until I have the rifle blue printed and rebarreld.

Any help much appreciated

 

[powderBurnz]

Personally I prefer the 700 trigger anyways.

Here's some old school instructions for it.

 

[CatShooter]

I have a 22-250 rem 700 VSF coming and I know its gonna need the trigger done, anyone got any tips or is there any online instructions to re work the std trigger to something decent. I know most people just buy a new trigger right off the bat but I want to cut back a bit, I am buying far too much these days and it does seem a shame just to discard it straight off the bat, surely it can be made useable for a year or so until I have the rifle blue printed and rebarreld.

Any help much appreciated

Craig...

GO here.

Best instructions for a Rem 700.

http://www.snipercountry.com/Articles/RemingtonTriggers.asp

If you have the new trigger, then just adjust the front lower,away from the receiver) screw with a 1/16th hex wrench.

They all can be adjusted to very good.


.