Raptors... Arne Brennen contact info?

[Justin Utherdude]

Howdy guys.

I was wondering if anyone has the contact info for Arne Brennan? All of the raptor websites appear to be offline and I was kind of interested in reaching out to get more info for a planned 45 raptor build. Some of the websites appear to be archived on archive.org, but I'd still like to reach out to Mr. Brennan for questions and whatnot. His old email is also offline, as the domain is no longer hosted as well.

Thank you for your time. Justin


This was on his old site, now on archive.org

"
Question – If I have questions, how can I ask them or is there a forum I can ask you on?

Answer – We do not follow forums or Facebook so if you have a question, please email us directly, but please read the following first:

Read through this website, including the FAQ section, before sending questions.
Compose a complete email with all of your questions. It is very time consuming to engage in back and forth communication responding to questions asked one at a time. Be respectful of my time.
There are multiple RAPTOR cartridges (45 RAPTOR, 375 RAPTOR, 7 RAPTOR, 257 RAPTOR), so begin with telling me what cartridge you are asking about. Also, tell me what gun you are using and the components you built it with.
Finally, you MUST include your first and last name; city and state; and a phone number so if we feel that it would be easier to call you to discuss your question. I will not respond to emails that do not include this information.
Lastly, if you have read these instructions, you can email me at arne@northamericansportsman.com
"

 

[paramedic]

I spoke with Arne maybe 1 1/2 years ago and he stated he had medical issues going on and i did not want to pry. Around the same time all of his sites were taken down. I am familiar with the 45 Raptor as I was constantly in contact with him around 2014 when he was first marketing the raptor. If i can be of service to you ref the raptor let me know. I have built several AR 10's and bolt guns with this cartridge.

 

[msalm]

I spoke with Arne maybe 1 1/2 years ago and he stated he had medical issues going on and i did not want to pry. Around the same time all of his sites were taken down. I am familiar with the 45 Raptor as I was constantly in contact with him around 2014 when he was first marketing the raptor. If i can be of service to you ref the raptor let me know. I have built several AR 10's and bolt guns with this cartridge.

Any #’s for gas system length and gas port diameter for the 45 Raptor? I have one I need to build, have the reamer, dies, and a pile of brass, might as well put one together.

 

[paperpuncher]

Any #’s for gas system length and gas port diameter for the 45 Raptor? I have one I need to build, have the reamer, dies, and a pile of brass, might as well put one together.

tagging in I’m in the same boat

 

[MBuechle]

I've got mid length gas on a 16-1/4" Saturn barrel on my Armalite. It functions fine although I haven't shot it a lot. Not enough to have a load worked up yet. Don't know the gas port diameter.

 

[John Forrest]

Try Scott Madesha he helped Arnie invent it or BW Outfitters in Iowa they put a different ramp together and made it work a little better they say.