Ramshot tac in 6 Dahser

[Bkluke]

Just wondering if anyone has used Ramshot TAC in a 6 Dasher with the 105 bergers? If so, how did it perform? Quickload data is close to RL 15 with a little higher pressure. Just looking for that competitive edge. :wave:

 

[Bkluke]

Thanks Donovan, Just trying to think of some options, with the powder shortage. I can't find any Varget or RL 15 in the big jugs. I did find some N140 though. Might try that. How does H4895 do in the Dasher?

 

[eggman]

H-4895 works fine in a 6 Dasher it's just a tad faster than Varget. I know a couple of guy's that use H-4895 for there go to powder in the 6 BRX. If you wanted to try Ram Shot powders you might try Big Game.

Rodney

 

[Bkluke]

I was looking at the difference between H4895 and IMR4895 on quickload and there is a huge pressure difference, with the MV that I need.
With H4895 having higher pressure. Is this correct? Or are they going to be closer to the same, in the real world? Can anyone point me to a burn rate chart?



Thanks
Brian

 

[Woody]

I am having good success with N140 and the Lapua 105's. Tested with the Bergers too and they were good as well.

Woody