• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Quickload for 6.5 Gap 4S

140 Berger Hybrid
Hornady Gap 4S Brass
H 1000 powder
26" barrel
COAL 2.85

140 Berger Hybrid
Hornady Gap 4S Brass
Re 26 powder
26" barrel
COAL 2.85

Trying to stay out of trouble ....Thanks
 
Last edited:
You can get this info right from GA. Most seem to be using 59-61 grs of H1000. QL has 6.5 rsaum but not the GAP 6.5 saum. I think the difference is just in the freebore but I know that GA had a few revisions etc. I am not up to date on the latest.
 
Here ya go.

If you're going to run a wildcat like that, cough up the $$$ for the program yourself.

Or he could join a online community of shared interest, maybe even a sub community dedicated to the specific topic, where people might have the experience or software in which he could pose the question and receive useful info.
Then only the people interested or willing to help would reply should they wish.

That's also a route one could take.
 
6.5 RSAUM with H1000.
----------------------------------------------
Cartridge : 6.5 mm RSAUM
Bullet : .264, 140, Berger Hybrid #26414
Useable Case Capaci: 64.289 grain H2O = 4.174 cm³
Cartridge O.A.L. L6: 2.850 inch = 72.39 mm
Barrel Length : 26.0 inch = 660.4 mm
Powder : Hodgdon H1000

Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !

Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms

-20.0 85 49.60 2434 1842 30131 9704 91.4 1.721
-18.0 87 50.84 2499 1942 32267 10023 92.8 1.675
-16.0 89 52.08 2565 2045 34563 10327 94.1 1.630
-14.0 91 53.32 2631 2151 37034 10613 95.3 1.587
-12.0 93 54.56 2697 2260 39697 10879 96.4 1.533
-10.0 95 55.80 2763 2372 42566 11124 97.3 1.483
-08.0 97 57.04 2829 2487 45664 11346 98.1 1.434
-06.0 99 58.28 2894 2604 49012 11542 98.8 1.387
-04.0 102 59.52 2960 2724 52637 11711 99.3 1.342
-02.0 104 60.76 3026 2846 56565 11852 99.7 1.299 ! Near Maximum !
+00.0 106 62.00 3091 2970 60828 11963 99.9 1.257 ! Near Maximum !
+02.0 108 63.24 3156 3096 65463 12043 100.0 1.216 !DANGEROUS LOAD-DO NOT USE!
+04.0 110 64.48 3220 3223 70508 12102 100.0 1.177 !DANGEROUS LOAD-DO NOT USE!
-------------------------------------------------------------------------------------

Sorry I don't have the latest QL version and mine doesn't have RL-26.
 
@CobraRed

Maybe you aren't aware, but the vendor has in the past expressly contacted forums regarding people essentially 'free-loading' by asking others to run the numbers for them rather than pay for the software, thereby cutting into the vendor's revenue. The possibility of litigation was raised... and the forum(s) had to put the kabosh a lot of things related to QL.

Personally I'd rather not have that happen to *this* forum.
 
That is ridiculous. They state in their disclaimer that "we neither assume nor imply any responsibilities for any results the user might obtain". Their EULA does not restrict the use of the data only the software. Good luck with that. I bought QL after seeing how useful it was subsequent to some kind folks helping me out with some QL data.
 
Last edited:
The more I share QL with others the more people are introduced to it.

It's free advertising for QL and if some don't like it I'm sorry I offend you. You're entitled to your opinion.

No different than shering the data in a reloading manual.

If you dont want it shared then don't make it/print it. Simple.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,682
Messages
2,200,838
Members
79,046
Latest member
GLINK964
Back
Top