• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Quick Release Rings

You did not ask about others but in addition to the Warne and Leupold I have tried the Bobro and ARMS lever mounts. The Bobro is my favorite and the ARMS lever is a second choice. If you have a Picatinny rail with good tolerances you can take the scope off and on with repeatable zeros. Sometimes I like to move the scope in the axial direction to refine a position and it is easy to do with the Bobro mount.
 
chkunz said:
You did not ask about others but in addition to the Warne and Leupold I have tried the Bobro and ARMS lever mounts. The Bobro is my favorite and the ARMS lever is a second choice. If you have a Picatinny rail with good tolerances you can take the scope off and on with repeatable zeros. Sometimes I like to move the scope in the axial direction to refine a position and it is easy to do with the Bobro mount.
Click to expand...
Thanks for the suggestion but they will be going on a 308 Mountain rifle and I want to keep weight down. That’s why I named the two choices mentioned.
 
I've got 3 sets of Leupold QRW rings and have nary a problem. However getting the top ring over the tube without marring the tube is a little tricky.
I hope this helps,

Lloyd
 
1shot said:
I've got 3 sets of Leupold QRW rings and have nary a problem. However getting the top ring over the tube without marring the tube is a little tricky.
I hope this helps,

Lloyd
Click to expand...

The gen2 Leupold QRW are supposed to be the remedy to the top ring issue. That’s the ones I ordered so we’ll see.
 
My newest Leopold's are the Gen2. I have my Vortex G.E. mounted in them and they are fine. I never had an issue with the Gen 1's for performance, just don't like the snuggness of the top section snapping over the tube. I can't comment on Warne rings, but they look they they would do the job.
 
  • Like
Reactions: fe1
fe1 said:
Have you installed any of them?
I’ve read where folks are having problems with the cap screws not being aligned is why I ask.
Click to expand...
I had a set a some years ago that had a problem with alignment but I have 3 sets I bought in recent years that are fine. I just like the look of the leupold better
 
  • Like
Reactions: fe1
1shot said:
I've got 3 sets of Leupold QRW rings and have nary a problem. However getting the top ring over the tube without marring the tube is a little tricky.
I hope this helps,

Lloyd
Click to expand...
Have a few of them and my experience is the same. Got sold on them years ago when the late great Dick H took a scope off and put it back on at 600 in the middle of a string without any change in zero.
 
  • Like
Reactions: fe1
Are the Warne a vertical split?

If so, they could be a minor pain in the ass to get your scope leveled.

I have a set of QRWs that were nice and easy to install but I don't really like the way the QR lever sticks out.

The set of Warne vertical split rings I have are nice but not QR and a pain in the ass to get everything aligned all at the same time.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
164,684
Messages
2,182,653
Members
78,476
Latest member
375hhfan

Share This Page

Back
Top