Question for "wet" case cleaners;ie S S media

[people]

I put them on a towel with a fan blowing over the brass. They dry over night.

 

[1shot]

Brass in the tumbler followed by a squirt of DWL and a dash of L-S for good measure. After an hour or two, I take them to the sink and put a large cheese cloth bag over the top of the tumbler and dump. Turn on the tap and rinse cases, pins and all in the sack, rinse the drum so it is ready to go for the next batch. Take the cases out, tap them together to get any remaining pins and place the brass on the racks of an old food dehydrator. Run it on 150 deg for a couple of hours. Any pins that were stuck in the brass are now free and easily collected with a magnet to be returned to the drum.
I hope this helps,
Lloyd