WANTED Primal Rights CPS priming tool

[JoshP]

Does anyone have a CPS they would be willing to let go and preferably trade on?

 

[rijndael]

If you don't find one, check out this alternative. I just got mine and I'm pretty thrilled with it so far:

PCPS Precision Case Priming System – Ugly Reloading USA

www.uglyreloadingusa.com

 

[JoshP]

If you don't find one, check out this alternative. I just got mine and I'm pretty thrilled with it so far:

PCPS Precision Case Priming System – Ugly Reloading USA

www.uglyreloadingusa.com

How close are they seating your primers?

 

[rijndael]

Give me a couple of hours and I'll post up some data points.

 

[rijndael]

I measured 3 of each:

CCI 450 = .1205" to .1215"​

6GT Alpha Brass = .1205" Pocket Depth (Not Uniformed)​

I cleaned the primer pockets of 10 pieces of brass and seated 10 primers.
They were all .001" or .002" below flush.

 

[JoshP]

I measured 3 of each:

CCI 450 = .1205" to .1215"​

6GT Alpha Brass = .1205" Pocket Depth (Not Uniformed)​

I cleaned the primer pocket of 10 pieces of brass and seated 10 primers.
They were all .001" or .002" below flush.

Thank you!

 

[DHuffman]

Are you seating to a preset stroke or finding touch? + Crush?

Haven't been able to watch the videos yet.

 

[rijndael]

It has a micrometer adjustment and the flat "shell holder" touches the die before the press cams over.

 

[Torsten Hindrichs]

If you don't find one, check out this alternative. I just got mine and I'm pretty thrilled with it so far:

PCPS Precision Case Priming System – Ugly Reloading USA

www.uglyreloadingusa.com

I received mine yesterday and I’m thrilled as well. Just assembled it and have to say that it’s very nicely made.

I do not own one, but it looks to me this unit would work very well in one of the small Harrell’s or same style presses.

 

[rijndael]

I would note that it works with the Hornady Lock and Load bushing setup too.

 

[Benchrest Braxton]

im gonna make a cps vs pcps video here soon

 

[rlporter507]

If you don't find one, check out this alternative. I just got mine and I'm pretty thrilled with it so far:

PCPS Precision Case Priming System – Ugly Reloading USA

www.uglyreloadingusa.com

I just got one, and ditto. more consistent than doing in my rcbs bench primer Using a accuracy one gauge.

 

[jonbearman]

That primer seater looks really nice.I gotta get one.

 

[DiffEQ]

I have the CPS.
I was concerned about the loose fit primer tube at first, but found that among my Dillon, RCBS and Hornady tubes, they all fit differently (Dillon being the sloppiest, Hornady the tightest). What I also found, in reaching over the CPS to get something out of my toolbox, if the fit was tight, I'd have bent the tube, whereas the slop allows me to sense that I'm pushing the tube and stop my motion without any damage to the tube.
Never had a misfeed in thousands primed.
My arthritis has certainly been thankful that I'm no longer squeezing my RCBS primer tool.