Press Stand

[300wsm]

Guys and Girls do any of you have a set of plans for a press stand like this one below.

Thanks in advance.[/

 

[Nodak7mm]

I built one of similar design 10-15 yrs before sinclairs came out with that one. I use it with my Forster Coax. Works great to this day and actually work so well, all three presses I have are all set up.

Pix of it on my bench a couple yrs ago here: http://noslerreloading.com/phpBB2/viewtopic.php?t=11502&start=0

If interested, holler for details.

Rod

 

[Dirtydave]

Nice stand Nodak, I just load small call stuff and was wondering if you need to clamp it down?
Thanks, Dave B.

 

[Nodak7mm]

Nope, never have had to. The foorprint is pretty much right on for balance. If you did not use enough case lube, you may hold it down with your hand once in awhile. But have never needed to clamp and thats even with full sizing 7STW size cases. With .204/.223 size, it dont move....

After using it this way for so long, it has worked so well, I'll prob never afix it to a bench.

Rod

 

[RonRouse]

Nodak, I am interested in that mounting stand that you have your press mounted on. Do you have a pattern for it? I have looked at them in Sinclair's catalog but I believe I could make one myself. Any help would be appreciated. You can send me a PM. Thanks. Ron

 

[brian427cobra]

Dillon 550/650 mount works just fine with a Co-Ax