PQP 2500X

[Paul Beel]

Anyone having extraction/ejection issues with the pqp 2500x

 

[TRSR8]

Issues, although rare, usually boil down to, dirty chamber, dirty bolt face/ extractor, mild bending of retaining clip for better tension, slight tuning of extractor with jewelers file for better case rim contact.

 

[tmwinds]

Anyone having extraction/ejection issues with the pqp 2500x

I’ve got a friend that’s having the same issue.

 

[TheDream]

Make sure your loading ramp isn't set too high up.

 

[USMCDOC]

Carbon

 

[Alex Wheeler]

Make sure your loading ramp isn't set too high up.

This is a common issue.

 

[BowChamp]

Buddy of mine picked up a used 2500X and was having issues extracting fired cases. The extractor spring was bent out of shape pretty good. I replaced it and all is good.

 

[BowChamp]

Make sure your loading ramp isn't set too high up.

This is a common issue.

Good to know.

Thanks

 

[PWNolan]

I bought a used SPF 2500X that wouldn't extract. Turns out the spring clip was on backwards and wouldn't allow the extractors to pop over the rim. Once I fixed that ejection was spotty at best. I bought a couple new spring clips and ejection improved but still not like it should be. So last time I took the bolt apart I took the spring off and gave it a little bend to give it more tension and it worked. I shot it at a match last Saturday and it ejected much better

 

[butchlambert]

Adjusting the loading ramp fixed mine.