Powder for .22-250

[Dgd6mm]

I've been reloading my .22-250 with CFE223 for about 300 rounds now and I'm happy with the results.
Understand I just plink with this thing with this load, but it pretty much hammers to 325 yards.

 

[SSL]

That is one great shooting #1!!

I fell in love with #1s in the late '80s and picked up my first one in the 90's. I have owned quite a few over the years (all #1Bs except a .220 Swift in the Varmint version) ranging from .223 to 30-06 and have always gotten them to shoot very well with a combination of judicious accurizing (bedding, trigger work and such) and finding the favored load...sometimes the hardest job! I'm finally down to just two (a .280 and the .22-250 mentioned). My .22-250 is a 70s manufactured rifle with the original barrel. It's getting a little worn and a small amount of fire-cracking is evident, but the old girl still shoots with its favorite load.

 

[long40shot]

Varget. Always Varget.

 

[JLT]

H380 is my go-to with lighter bullets in a .22-.250 AI. RL-15 does a good job, too.

If Vihtavouri powders are your thing, N-150 should do the trick.

 

[6MMWASP]

50s to 55"s have always shot well with H414, H380 and 4064 in every 22-250 I have ever owned. RL 17 is a very good choice with heavies in 22-250 AI's

 

[urbanrifleman]

Mtn -

Howdy !

+1 on what Odie said.

WW760 ( H414 same stuff ) works great in .22-250, 22-26" barrels. I prefer FED Large Magnum Riflen Match ( GM-215M )
when shooting WW60. This combo used w/ Hornady 55SX for shooting groundhog.

A 1-14 twist barrel would handle 50 - 60 gr bullets readily, as-long-as the 60s are < .750" long. * With your 1-12 twist barrel, you can go a bit heavier still on bullet wt, for example Hornady's 62gr ELd- VT; if so desired.

With regards,
357Mag

That's the exact magic load I shot in the 90s. 40.5 w760 and fed 215. 3850 fps Nosler Ballistic Tip. Basically fill the case and stick in the bullet.

 

[tstowater]

I've used 55 grain soft points with IMR4895. Don't know if available these days.

 

[TOObuilder]

Varget with a 50 Vmax is very good in my new 14 twist Tikka Super Varmint

 

[6MMsteve]

I shot IMR4320 in my 22 250 for yrs....if I had one today N140 would be my choice

 

[Sandbagger1]

Big Game 39.6 55gr nosler bt and let her rip

 

[Kittitas George]

Back when Remington made the 22-250 "legitimate" and 4895 was available and inexpensive (less than $2/lb) my load was 36.5 grains with a 50 or 52 grain Sierra. This load is no more, the powder has changed. It took me about forty years to shoot the barrel out of it. That 700, with a 2.5 to 8 Bausch and Lomb scope was a real shooter. Good memories!!!

 

[rockhound78]

Put an old factory barrel on my XR100 action and torqued it down and checked headspace (OK). Pulled out some cfe223 and started up the ladder. Getting pretty warm on the loads, primers starting to flatten (WW) but hit 39 gr with the 53 vmax and boy the groups shrunk. Velocity 3909fps. About 45 degrees out. Made it for clay pigeon matches at the club (25 degrees and 30mph winds are tough), so won't shoot it when its warm out

 

[41rem]

Big Game 39.6 55gr nosler bt and let her rip

Loading a bit less than that but running the 69 grain TMK. Looking for tight groups & 3200 fps or above

 

[Big Mc]

A friend of mine recently acquired a Remington 700 in .22-250. It's his first center-fire rifle that he'll be loading for (he loads pistol already), and so is looking for powder recommendations. It's a 1:12 twist barrel so he's looking at 52-55gr bullets. Use case is smacking steel and casual target shooting.

Looking at the lists in the Nosler and Hodgdon load cards, CFE223 looks appealing: it's generally available, meters well, and covers the other calibers he'd be interested in (a .223 service rifle is likely in the cards soon).

Any reason that wouldn't be a good choice, or any other powders worth considering? Since he's new to rifle he wants to keep variables to a minimum and focus on getting a good process in place and have really interested in trying a bunch of different powders at this point.

N135 for 55 gr pills.

 

[JRanum]

If per chance the above three pages of suggested powders are hard to come by,

33-34 grains of IMR 3031 and a 52-55gr bullet. Outstanding accuracy.

 

[41rem]

After quite a bit of experimenting went with 36.0 grains of Reloder 16 under the 80 ELD-X with a BR2 primer in Sig brass.

Getting 3100 fps & 1 MOA for 5 shots # 100 yards

Rifle is a stainless Tikka fast twist

 

[tbs]

I have been running 34.0 gr. H380 with nosler brass, 69 gr. Sierra HPBT and CCI BR2 primers.
When I was shooting 52 gr. Sierras it was H380 or just as good was Reloader 15.

 

[justinp61]

After quite a bit of experimenting went with 36.0 grains of Reloder 16 under the 80 ELD-X with a BR2 primer in Sig brass.

BGetting 3100 fps & 1 MOA for 5 shots # 100 yards

Rifle is a stainless Tikka fast twist

In a 1-12 twist like the op asked about?

I have two Savages, both 1-12, one a factory barrel the other a Shilen. I’ve had very good results with Varget and 4064 shooting Sierra 55gr Gamekings.

 

[Dgd6mm]

I just loaded 223 rounds of 22 -250 using H335 and 55gr bullets. This is my plinking Savage. The last time I used cfe223 and it did the job .