Boatschool02
Silver $$ Contributor
Original owner.
Purchased direct.
Minor nicks/dings on the bodies from normal use.
Carbide cutters, standard
Upgraded Carbide Mandrels (clean)
Model B (Fixed)
- IMHO, better design than an(y) "adjustable" model as there is ZERO lash or drift, etc.
- Adjustable via two allen inserts on the side. I was able to hit my target thickness within a couple careful tries.
This was the finest hand held model I tested. (I never switched to the IDOD)
7mm with 35 degree cutter
30cal with 30 degree cutter
Extra 30 degree cutter, used
Either tool face to face: $75
Both tools face to face $140
Extra cutter $15
Shipping, add $10 for USPS Small Flat rate Priority
Purchased direct.
Minor nicks/dings on the bodies from normal use.
Carbide cutters, standard
Upgraded Carbide Mandrels (clean)
Model B (Fixed)
- IMHO, better design than an(y) "adjustable" model as there is ZERO lash or drift, etc.
- Adjustable via two allen inserts on the side. I was able to hit my target thickness within a couple careful tries.
This was the finest hand held model I tested. (I never switched to the IDOD)
7mm with 35 degree cutter
30cal with 30 degree cutter
Extra 30 degree cutter, used
Either tool face to face: $75
Both tools face to face $140
Extra cutter $15
Shipping, add $10 for USPS Small Flat rate Priority
