PLEASE HELP looking for some load data for .308 100 & 200 yds

[trgtsnpr]

I'm looking for some load data to shoot 100 & 200 yds i lapua palma brass small primers.

brass ??

powders loads in gr. ??

bullets in gr. ??

primers federal match or cci 400 ??

speed through chronograph ??

any help is really appreciated thanks for looking and you help in advance bill

 

[Keith Glasscock]

Might be easier to narrow down if you give us some idea of what you are trying to accomplish.

I might suggest buying the Sierra loading manual. It is chock full of great information and some recipes that will give you reasonably good accuracy (try the accuracy loads).

 

[RonS]

I agree with busdriver and if you're only shooting 100-200 yards, try Nosler's manual, I have found some great recipes listed under there "most accurate loads tested". It would also help if you tell us what ingredients you are working with. Good luck and be safe.

 

[joshb]

My most accurate load, so far, is 37.3 Vihtavouri 135 behind a Hornady 168 AMAX. In my gun, 2.96( app col, cause i measure to the ogive) gets me 2k off the lands. Freshly annealed brass. Problem is, i'm using federal with WLR primers, so that may not help. The load is not hot by any means, but shoots tighter than my hot varget and 4064 loads, and is easy on my brass. My suggestion would be: look for coasters, not screamers.