PCP air gun gunsmith

[bearbar]

Does anyone know of a good PCP air gun gunsmith
Looking for someone to build a custom air gun
Any help would be apricated

 

[msalm]

Only one I knew of was Dennis Quackenbush...he still has a website but it looks as though it hasn’t been updated in awhile.

 

[PigButtons]

They are out there. Here is one I can personally recommend, Martin Rutterford formerly the owner of Rapid Air Weapons. Airguns-USA web site.

 

[TXJM]

Does anyone know of a good PCP air gun gunsmith
Looking for someone to build a custom air gun
Any help would be apricated

Did you check with anyone that shoots air rifle benchrest. They have a website. They must shoot customs and should be able to point you in the right direction.
chip

 

[Capt. Oblivious]

They are out there. Here is one I can personally recommend, Martin Rutterford formerly the owner of Rapid Air Weapons. Airguns-USA web site.

This is where I would start

 

[mjl650]

They are out there. Here is one I can personally recommend, Martin Rutterford formerly the owner of Rapid Air Weapons. Airguns-USA web site.

Also highly recommend Martin.

 

[Rook 6]

Airguns of Arizona might also be a good source.

 

[NateHaler]

On-Site Gunsmith – Pilkington Competition III

www.pilkguns.com

 

[dgeesaman]

Not sure what you consider “custom” but the best pcp tuner is Allen Zasadny. He does just about anything but it seems he’s mostly a mechanical guy.

 

[MikeT49]

Why don't you DIY? Here's a pic of a couple I put together from parts. The one in the Coyote At-One is what I call the "Stimulus Frankenairgun". It's got a Discovery main tube, Maximus 26" barrel, custom GMAC multi-shot breech, gage port adapter is from a M-rod pistol, pressure regulator in an Altoros, etc. You just need parts, a 5/8" 26" dowel, a chitload of o-rings and patience. You can build it to suit yourself. Mike