Parts NEEDED for TIMNEY Calvin Elite trigger

[doninreno]

I'm trying to do some repairs to a Timney Calvin Elite 2 stage trigger for a Remington 700 bolt rifle that is apparently an earlier version of this trigger and am in need of some parts. Apparently there exist a couple of versions of this same trigger...an EARLY one and a LATER one. The difference being that the pin or screw (OD of screw = 0.128") that the whole safety "pivot plate" that has the safety button on it is different...early ones being threaded with an allen head threaded screw (that enters from the R/H side as indicated by the screwdriver in the pics) securing it into the trigger " housing", where the later version is a threadless pin that is secured on the opposite side side by a circlip. The TIMNEY folks don't have the earlier threaded pivot any longer and a couple of those are what I need...could also use a non-threaded one to use when doing repairs. If anyone happens to have one or two of these TIMNEY CALVIN ELITE triggers in their "odds and ends junk box" (no matter the condition), I'd sure like to get my hands on some of those parts or maybe even a whole trigger or two to use as a parts source. If anyone has any of that and would part with it, PLEASE let me know...either free or for sale! Please email me at doninreno@gmail.com or PM me on this site. THANKS!!

 

[natdscott]

You don't need to post it twice. Trust: we'll see it. This is not a forum with 8 threads per minute in the calcifieds.

 

[smoooth]

What is the thread pitch and length of the screw?

Doubtful that Timney had special screws made just for that purpose?

Figure out the exact size of the screw, whether it’s inch or metric, and look at McMaster-Carr, google it, or check your local hardware store for something similar that could work.

My local hardware store has a selection of gunsmithing screws in those plastic pull out trays.
PM me if you want me look for something.

 

[sksshooter]

Call or email timney, they will take care of you. I needed a bottom bolt release arm and scrww for obe i had and they sent one out feee of charge. Really good to deal with.