• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Painting a Savage "tuppa Ware" Tactical stock ?

Just ordered a Savage Tactical 110 and planning ahead IF I don't like the T T T ie, Desert Tan stock, and am looking for advice on a "How to" paint this stock .

Thank you
 
Scuff with a scotch brite "grey"
Clean with water borne cleaner
"Alcohol, water and couple drops of dish soap" NO LANOLIN!!!
Plastic adhesion promoter
prime
Prep
Paint
Don't forget to mask bedding
THANK YOU
I'll make a list and see if I can get at Lowes
Plastic adhesion promoter
primer
Prep ?
paint
 
I get a rattle can of plastic adhesion promoter from my automotive paint store.
Give it 10 to 15 minutes before priming.
After primer has set sand n scuff primer to smooth surface and fix Imperfections.
Paint

Having access to spray equipment is optimum, but work with what you have means to.
 
Not sure I can get used to the Savage Desert Tan, SOoo, would an auto paint store have the primer as well as the "plastic adhesion" and required paint in the "rattle cans" ??
 
Just ordered a Savage Tactical 110 and planning ahead IF I don't like the T T T ie, Desert Tan stock, and am looking for advice on a "How to" paint this stock .

Thank you
I used Rustoleum camo flat black and Duracoat matte clear enamel on the grips. 20190216_172012.jpg
 

Attachments

  • 20190615_155259.jpg
    20190615_155259.jpg
    116.1 KB · Views: 25
Nice, On the Savage Shooters site there were suggestions to use auto spray de greaser, or brake spray cleaner
No you'll release oils in the plastic that will impede adhesion., create static and possibly fish eyes.
Water borne cleaner or alcohol!!
Same goes for not scuffing the surface.
No scratchy, no sticky!!
You need mechanical tooth for adhesion.
You might get away with it today, but it'll probably flake and peal later.
 
"No you'll release oils in the plastic that will impede adhesion., create static and possibly fish eyes.
Water borne cleaner or alcohol!!
Same goes for not scuffing the surface.
No scratchy, no sticky!!
You need mechanical tooth for adhesion.
You might get away with it today, but it'll probably flake and peal later."

Listen to this man, he paints vehicles for a living and does gun stocks as well.

Modern vehicles have a metric ton of polymer based trim such as air dams and bumper covers that he has to keep up with the latest finishing technology to repair/paint.

Do it right for a lasting finish.
 
I have been successfully painting my tupperware stocks for years. My technique has been a bit different from what is being described here though, access to a lot of the items mentioned here is simply not available to me. I just wipe the stock down with a degreaser and use Rustoleum spray cans, I do two or three light coats and am done, the biggest thing is to not spray it on too thick.
To me the rattle can method seems to make the most sense for a "using" rifle, even if it should get dinged or chipped all that is required for a fix is to do a light blend sand and respray the damaged area.
Rustoleum is my favorite rattle can brand, they have a multitude of colors and textures available.

drover
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,019
Messages
2,188,242
Members
78,646
Latest member
Kenney Elliott
Back
Top