Once fired 10mm brass value?

[sksshooter]

Just purchased some components from an individual. I ended up with 200 once fired 10mm brass that is primed. 300 rounds of loaded 10mm which was once fired and loaded. I intend to break those down. Will salvage the bullets for 40sw but i dont have a 10mm. Looking on the web seems 10mm prices are all over. Any suggestions of a price per piece on primed 10mm? I know 1k rimers are going for 80 at the liwest ive seen in person yet. Or should i deprime and keep the primers and sell the once fired brass?

 

[Mark M.]

Just purchased some components from an individual. I ended up with 200 once fired 10mm brass that is primed. 300 rounds of loaded 10mm which was once fired and loaded. I intend to break those down. Will salvage the bullets for 40sw but i dont have a 10mm. Looking on the web seems 10mm prices are all over. Any suggestions of a price per piece on primed 10mm? I know 1k rimers are going for 80 at the liwest ive seen in person yet. Or should i deprime and keep the primers and sell the once fired brass?

What brand is the brass?

 

[sksshooter]

You know i hadnt even looked through it but assume it to be mixed.

 

[Hoser]

For empty brass go with about 1/2 of whatever new Starline sells for. Add in a nickel each for the primer.

But.... just like 45 ACP, there is both small and large primer 10mm brass now.

 

[Monte F]

For empty brass go with about 1/2 of whatever new Starline sells for. Add in a nickel each for the primer.

But.... just like 45 ACP, there is both small and large primer 10mm brass now.

Why would anyone want small primer 45 ACP or 10mm brass. Really screws up your reloading on the progressive when one gets mixed in. I hate having to check every case when picking up range brass and want to kick the SOB in the scrotum that thought it was a good idea.

 

[Greg Y]

10mm REALLY depends on what it was shot in. A supported chamber vs a glock, a 180 at 1k vs 1350fps....some 10mm brass is dangerous to reload.