Old Lyman Lubricator #450

[oldgamer]

The outside has hand written 460 but the bottom says 452. Don't know if my dad ever took it out or he just swapped containers ?

 

[longbow]

Ask at Cast Boolits.com

Cast Boolits

This is the dedicated cast bullet forum!

castboolits.gunloads.com

 

[Charliemac]

Whatever is stamped on the die should be the size.

 

[243winxb]

Need to size some oversize bullets. Then measure after sizing. Harder alloys, with antimony, will spring back more after sizing. A .452" marked die, can spring back .001" to .453"
Or maybe pin gauges?
My RCBS vernier caliber can get close, measuring the inside of the die. An .008" difference should be easy to see.

If its a .452" die, opened to .460" a new center plug will be needed. Lube will flow to the top.

bottom says 452

Dies are easy to enlarge a few thousands, but not .008" Center plug becomes to small.

I been casting, using a Lyman 450, since 1970s.

 

[DHD]

Not sure if you are asking a question, or just showing it to us?

 

[SeabeeKen]

It looks used to me. I have the same one in the same tube. Mine also work in the RCBS lubrisizer