Non invasive scope mount on Krag made in 1900
- Thread starter Clark
- Start date
I had blank Alloy vise jaws from Boeing Surplus 3/8 x1.5x6". I milled trapezoids to provide V block clamping on the barrel.
I clamped with 1/4-28 bolts on 1" centers.
I drilled and taped 6-48 on 0.5" centers.
I drilled and tapped for a 10-32 Uncle Mike's sling stud.
I made a Rock Hard Maple beveled spacer to mate with the bipod foam ears.
I used a Picitinally rail made by EGW, cut off 4" and milled it thinner.
I drilled clearance and countersink on 0.5" centers for the 6-48 screws.
I used a Burris tactical 1" rings and a VX3 2.5x8 handgun scope.
This took two days to build and bore sight. It is going hunting on Saturday.
I clamped with 1/4-28 bolts on 1" centers.
I drilled and taped 6-48 on 0.5" centers.
I drilled and tapped for a 10-32 Uncle Mike's sling stud.
I made a Rock Hard Maple beveled spacer to mate with the bipod foam ears.
I used a Picitinally rail made by EGW, cut off 4" and milled it thinner.
I drilled clearance and countersink on 0.5" centers for the 6-48 screws.
I used a Burris tactical 1" rings and a VX3 2.5x8 handgun scope.
This took two days to build and bore sight. It is going hunting on Saturday.
Dusty Stevens
Shiner
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.