Nigthforce scope rings

[Ryan]

I want to buy the nightforce 8-32 by 56 with the 20 moa base but was wondering what size rings i need by size i mean height there are 4 different sizes
.885 Low
1.oo med.
1.125 high
1.375 X-high

thanks for any help

 

[WAMBO]

Depending on the barrel contour you'll need at least the mediums but maybe the highs.
These are the mediums on a Near 25 moa base with a NF 5.5-22x56 NXS atop a Sako TRG-S M995 action with a heavy straight taper barrel.
There is not enough space between the scope objective and the barrel for BC caps so I'm thinking about a set of highs.
Hope this helps,
Wayne aka WAMBO

 

[Preacher]

It will also depend on the bases your going to use.....
The lows are definitely out, and probably the mediums if you have a
full diameter barrel....

 

[Gman]

Will Ken Farrell standard height rings, in a Ken Farrell 20moa base, on a Rem 700 sa, be high enough for a 56mm Nightforce objective bell, to clear a HV contour bbl. ?