Nightforce Parallax Wheel ?

[RED DIRT]

Hey fella`s, does anyone make a parallax wheel for the Nightforce Competition 15-55x52 DDR-2 scope? I`m very old and i`m having a hard time adjusting the parallax these days. A wheel would really help me alot.

thanks guys

 

[Multiracer]

Look up MK Machining.

 

[RED DIRT]

Look up MK Machining.

Thank you Multiracer, I did find MK Machining already before coming here to ask. They look like plastic, or that 3D printed stuff. I should have said earlier that i would like an aluminum wheel, if some company makes them.

 

[Gman]

Thank you Multiracer, I did find MK Machining already before coming here to ask. They look like plastic, or that 3D printed stuff. I should have said earlier that i would like an aluminum wheel, if some company makes them.

I don't know if he makes a wheel for your NF Comp but try scope-werks.com. The guys name is Eric Sanders and he made an aluminum wheel for my Sightron SIII 8-32x. He does nice work.

 

[RED DIRT]

I don't know if he makes a wheel for your NF Comp but try scope-werks.com. The guys name is Eric Sanders and he made an aluminum wheel for my Sightron SIII 8-32x. He does nice work.

That`s great, THANK YOU, Gman!

 

[RED DIRT]

I don't know if he makes a wheel for your NF Comp but try scope-werks.com. The guys name is Eric Sanders and he made an aluminum wheel for my Sightron SIII 8-32x. He does nice work.

Gman,
i went to his website, and he DOES make a wheel for the Nightforce Competition! It is exactly what i`m looking for!!! Thank you so much for posting the info for me!!! And YES, i saw a few other wheels in there, you`re right, he does beautiful work!

Scope-Werks - Nightforce Competition 15-55x52 80mm Wheel

Click the picture twice for larger view

www.scope-werks.com

Again, THANK YOU @Gman SIR!

 

[Gman]

Good deal!

 

[Fire Dog]

Good deal!

A thank you from me as well, ordering up a wheel for my Majesta.
Too bad he does not seem to make anything for Khales.
I have one of their “Star” parallax adjusters as their design puts the parallax right under the elevation knob and without the “Star” it is easy to change the elevation while adjusting the parallax…
A circular wheel would be even easier to adjust than the “Star” that Khales makes.
Otherwise I love the K1050 and it’s clarity, just wish it had a slightly larger centre dot.

 

[Turbulent Turtle]

A thank you from me as well, ordering up a wheel for my Majesta.
Too bad he does not seem to make anything for Khales.
I have one of their “Star” parallax adjusters as their design puts the parallax right under the elevation knob and without the “Star” it is easy to change the elevation while adjusting the parallax…
A circular wheel would be even easier to adjust than the “Star” that Khales makes.
Otherwise I love the K1050 and it’s clarity, just wish it had a slightly larger centre dot.

You do know that March has wheels for the Majesta as well as their other riflescopes. When you received your Majesta, there was an extra component in the box that is called the Middle Wheel. It fits on the misnamed parallax knob, which is actually the side focus turret. I urge Majesta owners to install that middle wheel as it makes the side focus turret more granular, makes it easier to fine tune the focus. This is important when you're at 80X in a mirage condition when things change.

The middle wheel is also an adapter for one of the larger wheels available for the March riflescopes. I have been using a large 3.5 inch wheel for several years on my March scopes due to bad arthritis in my left hand (and elsewhere, sigh).

Accessories | MARCH Scopes | DEON Optical Design CorporationMARCH Scopes | DEON Optical Design Corporation

MARCH Scopes Official Site

marchscopes.com

They are aluminum and very light yet solid. They also come with a white tape on which airgunners write their distances. Yeah, airgunners love 60X and 80X riflescopes, when the target is the left eye of the fly...

 

[Fire Dog]

You do know that March has wheels for the Majesta as well as their other riflescopes. When you received your Majesta, there was an extra component in the box that is called the Middle Wheel. It fits on the misnamed parallax knob, which is actually the side focus turret. I urge Majesta owners to install that middle wheel as it makes the side focus turret more granular, makes it easier to fine tune the focus. This is important when you're at 80X in a mirage condition when things change.

The middle wheel is also an adapter for one of the larger wheels available for the March riflescopes. I have been using a large 3.5 inch wheel for several years on my March scopes due to bad arthritis in my left hand (and elsewhere, sigh).

Accessories | MARCH Scopes | DEON Optical Design CorporationMARCH Scopes | DEON Optical Design Corporation

MARCH Scopes Official Site

marchscopes.com

They are aluminum and very light yet solid. They also come with a white tape on which airgunners write their distances. Yeah, airgunners love 60X and 80X riflescopes, when the target is the left eye of the fly...

Yes, thank you, I did put the middle wheel on that came with the scope but still would like a larger surface to adjust with.
I will price out the genuine March wheel versus the Scope-Werks as anything “March” usually is $$$
Have you used one of the anti-cant levels for SPUHR mounts?
If so what do you think of them?
I have used various different ones that have either mounted to the scope or the Pic rail but theirs mount directly to the side of the rear mount.

Left eye of the fly..? House fly or Blow fly size..? {:~)

 

[Turbulent Turtle]

Yes, thank you, I did put the middle wheel on that came with the scope but still would like a larger surface to adjust with.
I will price out the genuine March wheel versus the Scope-Werks as anything “March” usually is $$$
Have you used one of the anti-cant levels for SPUHR mounts?
If so what do you think of them?
I have used various different ones that have either mounted to the scope or the Pic rail but theirs mount directly to the side of the rear mount.

Left eye of the fly..? House fly or Blow fly size..? {:~)

I completely understand and that's exactly why I have the 3.5 inch wheel on my Majesta (and other March scopes), the larger surface gives you greater granularity of control. I have no clue what the price of the wheel is, I ordered mine with the scopes, so they came at the same time.

I don't use Sphur mounts. I hear they are great, and people swear by them. I use Burris XTR mounts to help get close to 1000 yard 0 at mechanical 0. I want the best IQ I can get from these expensive riflescopes, I dislike having 20 to 30 MOA adjustment in the scope when I'm only shooting 1000 yards anymore.

My current anticant device is the Wheeler thing that attaches to the pic rail. What I like about is that it folds, and it's adjustable once you have it mounted. That last takes away any issue of not having perfectly plumb rails and so on.

I meant fruit fly.

 

[RED DIRT]

I don't know if he makes a wheel for your NF Comp but try scope-werks.com. The guys name is Eric Sanders and he made an aluminum wheel for my Sightron SIII 8-32x. He does nice work.

Hey G,
Eric called me the next day per my email to him. He`s making the Nightforce wheel for me. He`s starting it this weekend. What a super nice great guy he is. We talked for forever on the phone, just an absolute joy to talk to. We talked about some new stuff he`s doing, an he texted me a few pictures, he`s got some really kool stuff he`s coming out with! I told him that you sent me to him. He seemed very grateful of you. Anyway, thank YOU, again @Gman, for Eric`s info.

 

[Gman]

Hey G,
Eric called me the next day per my email to him. He`s making the Nightforce wheel for me. He`s starting it this weekend. What a super nice great guy he is. We talked for forever on the phone, just an absolute joy to talk to. We talked about some new stuff he`s doing, an he texted me a few pictures, he`s got some really kool stuff he`s coming out with! I told him that you sent me to him. He seemed very grateful of you. Anyway, thank YOU, again @Gman, for Eric`s info.

You are welcome!

I'm glad that he offers the wheel that you needed.

 

[Joewillie]

Also try Eric at Scopewerks, does great work