NF ring height???????

[eddief]

Which ring height do I want 1.00" or the 1.125"

They will be NF UL rings on top of a Murphys Precision 20MOA rail.

Scope: NF BR 12-42x56

Stiller TAC long action with a 30" HV contour 1.250 for 5-6" to about .900 to .950" at the muzzle

Thanks

 

[Steveb]

I use the 1.00" UL Rings with a Farrell 20 MOA base on a Rem Model 7 (XR100) with the same barrel contour with no clearance issues, however, the Farrell bases are high and I don't know your setup. If they are the same height you would be GTG with the 1.00 ring height.

Steve

 

[eddief]

Appreciate the feedback. My rail isn't as a high as Ken's rails, but it's higher than a NF rail. Thanks

 

[Steve Blair]

One of my .308 rifles is a Borden action with Murphy Precision rail, HV contour and NF 12-42. The rings are NF UL 1.125" and provide adequate clearance. I would not recommend the NF 1.0" with this combination. A scope with smaller objective would allow using the lower ring set.

 

[eddief]

Greatly appreciate the communication Steve! ;D