CH87
Silver $$ Contributor
I’ve decided to sell my Nesika Model K F Class rifle. Would like to include the reamer and dies with it and will most likely sell reloading components seperately (Sierra bullets and Lapua Brass). Will not sell components though if rifle doesn’t sell. This is the first “big” sale I’ve made here, so please be patient with me. Please see below. Feel free to PM me with any questions or contact info.
Rifle was built by Ray Perry in Bridge City, Texas. This particular barrel and stock have zero rounds on them. I wanted a tighter twist and a better stock than what I had on my original setup. When completed, I set it in safe and life happened: hurricanes, pandemic, family, hobbies changed, life happened. Needs a good home, or it will continue to be a safe queen
-Nesika Model K Action: single shot solid floor, right hand bolt, left hand port.
-Krieger 6mm Barrel 1in8 twist, chambered in 6mmBR .2704 neck with custom reamer made by PT&G for 107gn Sierra Matchkings, approx 28” long. Zero rounds down tube.
-McMillan Tooley MBR stock with sniper fill for weight.
-4oz Jewel Trigger
-Talley Rings
-Sightron Siii 8-32x56mm Scope with 4” sunshade
-PT&G 6mmBR Reamer, one use
-Redding die set with assorted neck bushings
Looking to get 3500 for above.
Components: (will provide accurate count once I have time to count everything)
-1000+ 6mm 107gn Sierra Matchking Bullets
-300 or so 6mm Lapua Brass (I recall 200+ unopened/unfired)
Will provide component asking price once counted
Rifle was built by Ray Perry in Bridge City, Texas. This particular barrel and stock have zero rounds on them. I wanted a tighter twist and a better stock than what I had on my original setup. When completed, I set it in safe and life happened: hurricanes, pandemic, family, hobbies changed, life happened. Needs a good home, or it will continue to be a safe queen
-Nesika Model K Action: single shot solid floor, right hand bolt, left hand port.
-Krieger 6mm Barrel 1in8 twist, chambered in 6mmBR .2704 neck with custom reamer made by PT&G for 107gn Sierra Matchkings, approx 28” long. Zero rounds down tube.
-McMillan Tooley MBR stock with sniper fill for weight.
-4oz Jewel Trigger
-Talley Rings
-Sightron Siii 8-32x56mm Scope with 4” sunshade
-PT&G 6mmBR Reamer, one use
-Redding die set with assorted neck bushings
Looking to get 3500 for above.
Components: (will provide accurate count once I have time to count everything)
-1000+ 6mm 107gn Sierra Matchking Bullets
-300 or so 6mm Lapua Brass (I recall 200+ unopened/unfired)
Will provide component asking price once counted
