Need info off of the thumlers mod b hi speed motor.

[jonbearman]

What I am looking for is the frame number,horsepower and anything printed on the motor tag.Thanks to whomever can help me out.

 

[tac284]

Thumblers high speed mod B

Motor: Fasco Industries, Inc.
Motor Division
Assembled in Mexico

No. 71215777
Type U21
RPM 3000
V 115
Hz 60
A 1.12
Sealed Ball Brg
H/P 1/30

Hope it helps!

 

[jonbearman]

THANK YOU as the thumlers factory site is useless.Thanks again!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[tac284]

Added the pic! Your welcome, glad I could help.

 

[Torg]

Use mine to Boron plate, bullets. I have to have fan blowing directly on tumbler motor, to keep it from overheating. With drive belt off, 10 min & it'll be hotter'n heII. Much 60 cycle hum when running. Email to co. was ignored. They've sold tons of these, over the years. Guess I just lucked into a POS.
Torg

 

[jonbearman]

Another example of really poor management and stupid company policys.I am almost sorry I bought the damn thing.

 

[AR Shooter]

On the positive side I've given them a call and they were most helpful and were happy to provide any info ask for. Like many small businesses, they likely don't have the staff to answer e-mails. Will guess that half the gunsmiths out there don't respond to e-mails. Have to pick up the phone.

BTW - have found that the 'magic elixir' cleaning fluid that AZ Sharpshooters sells with their ceramic media to work well. While expensive, it does a good job of cleaning/polishing the brass. Have also found that pre-soaking the brass in a jug of water with a cap of Dawn in it for 24-hours helps.