Need help from 6mm Dasher shooters
- Thread starter JHardy
- Start date
falconpilot
Gold $$ Contributor
I went with a .106 on my reamer. This was on the advice of Dave Kiff for 105/107/108 bullets. A .99FB should work OK, but will require setting the bullet a little deeper, thus possibly limiting your powder loads or compressing the load. 33.5 grs of Varget fills the case,I don't use a drop tube)pretty much all the way to the neck/shoulder junction.
BTW, I've found on that while fireforming the brass, a 6.5 expander mandel works much better than a .257 expander. The 6.5 creates a much more pronounced false shoulder. Since using the 6.5 expander, I've had no pierced primers, misfires, etc.
BTW, I've found on that while fireforming the brass, a 6.5 expander mandel works much better than a .257 expander. The 6.5 creates a much more pronounced false shoulder. Since using the 6.5 expander, I've had no pierced primers, misfires, etc.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.