Need 3d print file for AICS long action single shot mag? Or mag Dimensions?

[chuckbuster243]

Looking for a .stl or dimensions for a LONG action aics single shot mag. Short action files are everywhere but not a long in sight. I am waiting on some mags to come in and thought about just printing up one to work up some loads. figure I can just lengthen a 308 and run it but dont have a length in MM to send to the slicr software. Thanks, Matt

 

[Newhouse]

Will this work. https://www.thingiverse.com/thing:3181005

 

[chuckbuster243]

Will this work. https://www.thingiverse.com/thing:3181005

that one works great in my short action. I haven't found one for a long yet.

 

[shoot4fun]

Looking for a .stl or dimensions for a LONG action aics single shot mag. Short action files are everywhere but not a long in sight. I am waiting on some mags to come in and thought about just printing up one to work up some loads. figure I just lengthen a 308 and run it but dont have a length in MM to send to the slicr software. Thanks, Matt

Not a print but these work great:

Original Bob Sled AI-300W Single Shot Magazine fits Accuracy International 300Win and 338L - 3.720 inch

the ai-300w bob sled provides a single shot loading bed or follower to 300 win mag and 338 lapua with a 3.720 inch accuracy international compatible magazine well.

www.eabco.net

 

[chuckbuster243]

Not a print but these work great:

Original Bob Sled AI-300W Single Shot Magazine fits Accuracy International 300Win and 338L - 3.720 inch

the ai-300w bob sled provides a single shot loading bed or follower to 300 win mag and 338 lapua with a 3.720 inch accuracy international compatible magazine well.

www.eabco.net

I may have to go that route, its crazy that so many short action ones are floating around to print and long fails to exist. Thanks, Matt

 

[GenePoole]

I made a couple. Let me dig up the files.

Do these look about right? I have another but it is labeled AI_LA_XLR.

 

[GenePoole]

Forum won't let me upload an STL. Here's a link to google drive for the stl.

https://drive.google.com/file/d/1lvzzzzAZZTnClzoVSgzWaLqGkn4aUs_S/view?usp=sharing

(edit: whoops. Got the wrong one. link updated).

 

[chuckbuster243]

Forum won't let me upload an STL. Here's a link to google drive for the stl.

https://drive.google.com/file/d/1lvzzzzAZZTnClzoVSgzWaLqGkn4aUs_S/view?usp=sharing

(edit: whoops. Got the wrong one. link updated).

Thanks! I think this one is gonna work perfect! I will let you know in a couple hours when it comes off the printer. Shoot strait and Merry Christmas, Matt