N135 ?

[Okumacaptain]

So I use Reloder 15 but can’t find any . I have found N-135 .
Anyone using it in 6BR ? Results ?

Thx

Mark

 

[madmixerman]

I use it in my 14 twist 6br.

 

[mgdietrich]

Using in my dasher, no reason it won’t work great in 6br. Similar to h4895 in burn rate

 

[Bill Norris]

So I use Reloder 15 but can’t find any . I have found N-135 .
Anyone using it in 6BR ? Results ?

Thx

Mark

I used it in my 6BR and 6BRX with 80 & 88 gr. Bergers with great accuracy.

 

[Clancy]

I use it with 68s, love it. 30 fps difference between 26 and 99 degrees too…. Not bad

 

[Murray Brook]

I have used it in my 6br with the 64 gr Berger Column bullet and the 75 gr Hornady V-max. Worked good. Lately I've been testing the 75 gr V- max with N-140. Looking good also.

 

[jackieschmidt]

So I use Reloder 15 but can’t find any . I have found N-135 .
Anyone using it in 6BR ? Results ?

Thx

Mark

I consider it the go to powder for 68 grn bullets.
It is a tad fast for the heavier bullets used in 1-8 twist barrels.

I have about 20 lbs of Reloader 15. Where do you live.

 

[dc.fireman]

26.1 gr. of N-135
Norma Case
Fed 205M
Berger 105 gr. Hybrid Target, seated .010" off the lands

This is in a 1/8 26" barrel. It gives me right under 2200 fps. at 200 yards, according to the SOLO e-Target. It drops to 1915 fps avg. at 300M, but it holds slightly larger than .5 MOA.

 

[Okumacaptain]

I consider it the go to powder for 68 grn bullets.
It is a tad fast for the heavier bullets used in 1-8 twist barrels.

I have about 20 lbs of Reloader 15. Where do you live.

Little Meadows, PA

 

[Okumacaptain]

I use it with 68s, love it. 30 fps difference between 26 and 99 degrees too…. Not bad

Trying 68s today at 300 with 8 twist and 34g of 15 .

 

[PopCharlie]

I've used n135 with 68gr Barts ultras and 64gr Berger column bullets in my 8 twist 6br. Good results.
PopCharlie

 

[RussellJ]

So I use Reloder 15 but can’t find any . I have found N-135 .
Anyone using it in 6BR ? Results ?

Thx

Mark

I use it in one of my 6BR rifles, it's a 14-twist barrel and I'm shooting Hornady 75grn V-Max bullets with great groups.

 

[Sleepyhollow]

N135
Lt 30
Lt32
H335
All do well in my BR for 68 gr bullets. N150 was my go to for 105-108 gr range.

 

[JEFFPPC]

Straight 6br, 135, you supply your choice of bullet. 22br, same answer.

 

[Mulligan]

So I use Reloder 15 but can’t find any . I have found N-135 .
Anyone using it in 6BR ? Results ?

Thx

Mark

I use N-135 in a couple of my dashers pushing heavy bullets. I find it just slightly faster (.1 to .2gr) than H4895 in the same application. I have to adjust both powders with the conditions, the adjustments are so close that I suspect there is no statistical difference.
A curious observation, I can hit the high node with N-135 ( although it is not the accurate node) without any pressure signs in both dashers, but cannot get there with N-140. For me, in my rifles, N-140 hits pressure well before N-135.
CW