Musgrave Bolt disasembly
- Thread starter TrxR
- Start date
Cock the action, apply the safety catch & rotate the shroud. If my memory is good, it's held in by a stud & you only have to rotate 90 degrees.
Their weakness is that the sear is held in place by a pointed grub screw that lands in slots cut every (?) degrees around the circumference of the back of the firing pin. The screw has a crappy slotted head & is easy to butcher, even if you prep it with a good penetrating oil. Be vewwy careful.
Firing pin travel is adjusted by screwing the sear back or forward to the desired point.
Hope that this helps.
Their weakness is that the sear is held in place by a pointed grub screw that lands in slots cut every (?) degrees around the circumference of the back of the firing pin. The screw has a crappy slotted head & is easy to butcher, even if you prep it with a good penetrating oil. Be vewwy careful.
Firing pin travel is adjusted by screwing the sear back or forward to the desired point.
Hope that this helps.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.