Marlin 25 22lr bolt screw needed

[Rem06]

about the size of a flattened BB Holds in the striker assy ....Wife's 22lr was hanging up firing so i took bolt apart and yeah, lost the screw! Grrrr. my bad!

anybody have one i can buy off you or a link to get another?

 

[marazzi59]

Give Marlin a call to at least find out size and thread of screw. Then repost if you still need help

 

[Ggmac]

Marlin / Remington will send you one . At least they use to . If not numrich has them .
Last resort is to try others to check tpi or re tap to a common tpi and get a bag full at your local hardware store

 

[Rem06]

ill give Marlin a call, would you know if it would be std or metric?

i have ordered from Numrich's in the past

 

[drover]

If you have an Ace Hardware near you try there, they have rows of speciality screws including gunsmith screws. The cabinets are a battleship gray and have literally hundreds of drawers in them. I have been able to find any speciality screw I looked for there.

drover

 

[Ggmac]

ill give Marlin a call, would you know if it would be std or metric?

i have ordered from Numrich's in the past

Sae but could be specific for that application, just as scope screws are 6-48 or 8-40 .

 

[Rem06]

awesome, i do have an Ace nearby,I'll hit them this am.

i have an email into Marlin/Remington also. Their reply was Jack First

thx for the help guys,ill let you know how i make out.

 

[drover]

awesome, i do have an Ace nearby,I'll hit them this am.

i have an email into Marlin/Remington also. Their reply was Jack First

thx for the help guys,ill let you know how i make out.

Don't just look under the gunsmith screws, there is a fair chance that the screw is a standard screw and it may be in a drawer that is not in the gunsmith screw section. I am always surprised at the variety of misc and oddball screws they have on hand.

drover

 

[Rem06]

BTT

anybody have a bolt assy in a rifle that dont work?

i just need this screw....item 38

struck out on all above options

 

[Rem06]

 

[Shawnba67]

If you can figure out what thread you have you and a mill file can make about any head shape you need.
Alternatively. The missing screw didn't leave this plane of existence. It's still in the area.

 

[Sniperhandle]

If you can figure out what thread you have you and a mill file can make about any head shape you need.
Alternatively. The missing screw didn't leave this plane of existence. It's still in the area.

This

Get a magnet, The telescoping kind and run it underneath workspaces crevices whatever, You would be surprised how many times it works, You might even find other stuff you lost! I also use compressed air to blow under things and a lot of times the lost screw or part will show up.

 

[Bigeyeshunter]

Pm sent

 

[Hi-NV Shooter]

BTT

anybody have a bolt assy in a rifle that dont work?

i just need this screw....item 38

struck out on all above options

View attachment 1379950

Did you find the striker retainer screw you needed? I believe I have one. been a few years since I owned and shot Marlins. I don't remember what the other screws were for. send me a PM

Lee

 

[Rem06]

it certainly looks like this one?

i just found a gunsmith @ 20 min ride from here and took him the bolt to redrill and tap with a std screw. he said a few weeks. $25-30 bucks.

it is very proprietary. if that screw came from a marlin bolt like pictured it may not be too late to get

if ya want to pop it into a piece of cardbord in an envelope?
just write to hand sort on envelope and it should get here for a stamp?

 

[Hi-NV Shooter]

View attachment 1381993View attachment 1381993

it certainly looks like this one?

i just found a gunsmith @ 20 min ride from here and took him the bolt to redrill and tap with a std screw. he said a few weeks. $25-30 bucks.

it is very proprietary. if that screw came from a marlin bolt like pictured it may not be too late to get it?

Mark Koeck
11797 thompson road
huntingdon pa 16652

if ya want to pop it into a piece of cardbord in an envelope?
just write to hand sort on envelope and it should get here for a stamp?

Ok I will try and send it today. I am pretty sure it is the striker screw. I used to shoot Marlins and had 3 880SQ's and a bunch of parts

Lee

 

[Rem06]

took to PM

awesome site!!!

 

[Rem06]

Hi-NV Shooter is AWESOME!!!​

wifes 22 is back in action!
thank you so much!
hats off to a great guy!!!!

 

[Hi-NV Shooter]

Hi-NV Shooter is AWESOME!!!​

wifes 22 is back in action!
thank you so much!
hats off to a great guy!!!!

Well, I am glad that was the screw. I may have some other parts somewhere if I find I will send them to you.
I don't have any Marlins so it would just sit somewhere.

Lee

 

[Rem06]

cool, i have 3, 25's. 2 22lr and the 22mag

that screw is a 4-48