Mark 7 revolution press fully automatic ammo plant

[Westhunder]

This is completely kitted out. Currently set up for .223/5.56 and .300blackout. Includes 2 sets of dies for each setup, conversion for bullet feeder. Look at the quote for complete list of parts.

Loaded less than 5000 rounds and that’s being very generous. This would be great for someone shooting competitively or wants to convert all of that brass and bullets they have laying around but don’t have the time. Once it’s set up, you just flip the switch and keep the brass, bullets, and powder topped off. The back office will also walk you through any issues via phone or video chat as well as link you to private videos on the machine. It’s actually quite easy.

I also have 2 spare tool heads for this press as I was going to load 9mm as well, just couldn’t get the parts during the Covid. Parts are readily available for conversion see attached P.O.

Shipped tyd $10,000

*** forgot to mention, there is a special die and cutter that can can covert .223 to .300 blackout. You can throw in a load of cleaned range pick up brass, de prime, swage, and covert to 300 blackout with one pass. This would be great for someone with a brass business too.

 

[vwtech]

I am interested in some items if your willing to split some things up

 

[Westhunder]

@vwtech this isn’t the type of thing you split up….

 

[Westhunder]

Ttt

 

[Westhunder]

Up

 

[vwtech]

@vwtech this isn’t the type of thing you split up….

I understand i run a revolution myself just wanted to see if you wanted to sell a tool head

 

[Westhunder]

Weekend bump

 

[Chiquita]

Curious how many rounds per minute can this produce?

 

[Westhunder]

Curious how many rounds per minute can this produce?

Marketed at 3500 rounds per hour. Runs more smoothly without fault at about 1/2 that. After a little tweaking you find a groove that the brass you are running likes and it runs like a typewriter.

This can be adjusted instantly on the fly using the touchscreen

 

[Chiquita]

Marketed at 3500 rounds per hour. Runs more smoothly without fault at about 1/2 that. After a little tweaking you find a groove that the brass you are running likes and it runs like a typewriter.

This can be adjusted instantly on the fly using the touchscreen

At that speed I can run it for one hour and shoot for three years.

Sorry I will to pass on the purchase.

 

[Westhunder]

At that speed I can run it for one hour and shoot for three years.

Sorry I will to pass on the purchase.

Ha! Where this thing shines at those speeds is processing brass. You can blow through some brass with this baby! I have plenty of that I can make available to the buyer as well.

It will really blow your mind, I’ll try and take a video of it running, I was waiting to do that live with an interested party, but I’m surprised there isn’t more interest, no one has even tried to low ball me

 

[Greg Y]

How much real estate does this require to be able to operate and service it? Does it need a bench bolted to the floor to stop vibration?

Lastly, what's your plan for shipping? There's a lot of difficult to pack stuff going on there.

My neighbor and I are seriously considering...

 

[Westhunder]

How much real estate does this require to be able to operate and service it? Does it need a bench bolted to the floor to stop vibration?

Lastly, what's your plan for shipping? There's a lot of difficult to pack stuff going on there.

My neighbor and I are seriously considering...

Pm sent. Thanks for your interest Greg! Look forward to speaking with you and answering all your questions

 

[Westhunder]

Ttt

 

[Westhunder]

Btt

 

[Westhunder]

Up.

 

[Westhunder]

Ttt

 

[Westhunder]

Buy me with your refund and use me as a tax write off!

 

[Westhunder]

Weekend bump

 

[Westhunder]

Up