Magazine question

[mike a]

Most of you have seen my baby before. So that’s a ARC 308 magazine in M5 bottom metal. I’m going to change barrel and bolt face to 223. Can I just stick a 223 magazine in or do I have to change bottom metal?

 

[300_whisper]

Should be able to stick a .223 specific mag in there. SA BM is SA BM. Just make sure it’s a .223 mag so it feeds properly.

 

[22DASHER]

Accurate 223 mags with the plastic inserts will work the best. If you want to run your bullets seated long then you will have to dremel a little of the plastic. But it’s very easy

 

[Rob01]

Yup an MDT .223 AICS mag should work fine. I have a TL3 with a 6.5 Creedmoor and .223 barrel and I use the MDT mags with the .223 and they work great.