Magazine filler block,... is there such a thing?

[Lefty Trigger]

Is there such a thing to make my new Savage 10T .223 rifle single feed? I hate loading the rounds in the magazine. I kinda like just feeding them single but that's really hard with the Savage rifle and the center feed mag you have to fiddle with them to get them started in the chamber. My old .223 rifle used the Magpul mags and there was a "filler block" that latched in place of the mag and made it single feed. Not sure there is such a thing for the Savage mag??

 

[Lefty Trigger]

I think I found what I need at Sharp Shooter Supply...….

 

[22DASHER]

I think I found what I need at Sharp Shooter Supply...….

I would recommend doing yourself a favor and look up some reviews of SSS before ordering.

 

[Boyd L.]

Edited. The single shot follower from Hi-Score will not work with the centerfeed system.

I’m sure some will consider it a “bubba fix” but on a Remington 700 I inverted a Weaver one piece base, cut it to fit the magazine cutout on the action, and epoxied it in place. Feeds well.

 

[germanlongbow]

I use a piece of foam cut to dimensions and a single shot follower ground to fit. Can go from single shot to mag fed in 30 seconds. Scott

 

[nmkid]

I've been waiting since April for an order from them! I knew beforehand about their long wait times but, I needed the part I ordered. They are the only folks that sell them.

 

[Lefty Trigger]

I've been waiting since April for an order from them! I knew beforehand about their long wait times but, I needed the part I ordered. They are the only folks that sell them.

Do they have a retail store or is this a guy working out of his garage? I'm only a 1hr 10min motorcycle ride away from where their location, could just ride up and pick up what I need. Midway sells the filler plate but my gun has the detachable box with center feed and that is a problem.

 

[nmkid]

Don't know about their store at all. I think it's just Fred doing all the smith work. I've gotten a couple of their magazine followers before. His work is very good but, the wait.

 

[Damon555]

I sent SSS a check for a Savage single shot follower on a Monday and received the product that same Friday. No problems at all and the follower works like a charm.

Single-Shot Loading Ramps https://www.sharpshootersupply.com/

 

[nmkid]

I sent SSS a check for a Savage single shot follower on a Monday and received the product that same Friday. No problems at all and the follower works like a charm.

Single-Shot Loading Ramps https://www.sharpshootersupply.com/

You caught them just right! My followers took 6 weeks to the day!