Hi-NV Shooter
Gold $$ Contributor
I have a M12 that I built as a RFBR rifle this was project to see if one these rifles could be made into a competitive BR rifle. rifle will be 5 years old come September it has been a great project and even has an ARA UL win to its credit as well as numerous club match wins. a few 250 RBA targets.
Build information-
Action- factory M12 that has had the action face trued, new rear action hole for a 1/4"-28 action screw, D/T for scope bases comes with Harrell's dovetail bases. bolt has 3/4-oz of weight added to the cocking piece to provide better pin hit (see example cases) scope and rings not included
Barrels - 1-28" 3G Benchmark with Nevius chamber. profile 1.0 for 3" then radius taper to .850 about 3500-4000 rds. shot
1- 24" 3G Heavy reverse taper Benchmark with Nevius chamber (currently on action). profile 1.0 for 3" then radius taper from.760 to .915 about 2000 rds. shot. with lighten Harrells tuner
both barrel shoot really well. the ARA win came with the 28"
Stock- Don Stith Straightline classic originally inlet for a Falcon action. it is bedded with a steel bedding bar. bar is about 12" long. custom made trigger guard. I reposition the rear action screw so that it now has a regular 1/4"-28 screw. two 1" brass rods(removable) are behind the recoil plate rifle is about 20-lbs. custom made brass recoil plate 1' thick.
Trigger- factory M12 trigger that has been repined by me and now has about a 1.8-oz release no safety.
Miscellaneous- M.Werks bore guide with two inserts for .187 rod or. 200. extra Fring pin springs, extractors, extractor springs. I have a lot more pictures but can only put 6 for the add. I can email pictures if requested. I actually have 96.6MB file of all the work done and testing I did over the last 5 years.
Asking $1950.00 shipped within lower 48 rifle with be shipped by my FFL in a hard case. payment by check from gold members or USPS money order everyone else. if you have any questions, please PM me.
Thanks,
Lee
Build information-
Action- factory M12 that has had the action face trued, new rear action hole for a 1/4"-28 action screw, D/T for scope bases comes with Harrell's dovetail bases. bolt has 3/4-oz of weight added to the cocking piece to provide better pin hit (see example cases) scope and rings not included
Barrels - 1-28" 3G Benchmark with Nevius chamber. profile 1.0 for 3" then radius taper to .850 about 3500-4000 rds. shot
1- 24" 3G Heavy reverse taper Benchmark with Nevius chamber (currently on action). profile 1.0 for 3" then radius taper from.760 to .915 about 2000 rds. shot. with lighten Harrells tuner
both barrel shoot really well. the ARA win came with the 28"
Stock- Don Stith Straightline classic originally inlet for a Falcon action. it is bedded with a steel bedding bar. bar is about 12" long. custom made trigger guard. I reposition the rear action screw so that it now has a regular 1/4"-28 screw. two 1" brass rods(removable) are behind the recoil plate rifle is about 20-lbs. custom made brass recoil plate 1' thick.
Trigger- factory M12 trigger that has been repined by me and now has about a 1.8-oz release no safety.
Miscellaneous- M.Werks bore guide with two inserts for .187 rod or. 200. extra Fring pin springs, extractors, extractor springs. I have a lot more pictures but can only put 6 for the add. I can email pictures if requested. I actually have 96.6MB file of all the work done and testing I did over the last 5 years.
Asking $1950.00 shipped within lower 48 rifle with be shipped by my FFL in a hard case. payment by check from gold members or USPS money order everyone else. if you have any questions, please PM me.
Thanks,
Lee
Attachments
Last edited:
