SELLING M12 BR rifle with two Benchmark. barrels REDUCED FOR 4th of JULY also new single barrel price. SPF

[Hi-NV Shooter]

I have a M12 that I built as a RFBR rifle this was project to see if one these rifles could be made into a competitive BR rifle. rifle will be 5 years old come September it has been a great project and even has an ARA UL win to its credit as well as numerous club match wins. a few 250 RBA targets.
Build information-
Action- factory M12 that has had the action face trued, new rear action hole for a 1/4"-28 action screw, D/T for scope bases comes with Harrell's dovetail bases. bolt has 3/4-oz of weight added to the cocking piece to provide better pin hit (see example cases) scope and rings not included
Barrels - 1-28" 3G Benchmark with Nevius chamber. profile 1.0 for 3" then radius taper to .850 about 3500-4000 rds. shot
1- 24" 3G Heavy reverse taper Benchmark with Nevius chamber (currently on action). profile 1.0 for 3" then radius taper from.760 to .915 about 2000 rds. shot. with lighten Harrells tuner
both barrel shoot really well. the ARA win came with the 28"
Stock- Don Stith Straightline classic originally inlet for a Falcon action. it is bedded with a steel bedding bar. bar is about 12" long. custom made trigger guard. I reposition the rear action screw so that it now has a regular 1/4"-28 screw. two 1" brass rods(removable) are behind the recoil plate rifle is about 20-lbs. custom made brass recoil plate 1' thick.
Trigger- factory M12 trigger that has been repined by me and now has about a 1.8-oz release no safety.

Miscellaneous- M.Werks bore guide with two inserts for .187 rod or. 200. extra Fring pin springs, extractors, extractor springs. I have a lot more pictures but can only put 6 for the add. I can email pictures if requested. I actually have 96.6MB file of all the work done and testing I did over the last 5 years.


Asking $1950 REDUCED FOR 4th of JULY $1800 for both Benchmark barrels. $1550 for current Benchmark on action barrel only (also includes original factory barrel) shipped within lower 48 rifle with be shipped by my FFL in a hard case. payment by check from gold members or USPS money order everyone else. if you have any questions, please PM me.

Thanks,
Lee

 

[jamesr_postma]

I hope someone buys this quickly! I need the temptation taken away! Good luck with your sale!

 

[Hi-NV Shooter]

I hope someone buys this quickly! I need the temptation taken away! Good luck with your sale!

Thanks

 

[Hi-NV Shooter]

I have a M12 that I built as a RFBR rifle this was project to see if one these rifles could be made into a competitive BR rifle. rifle will be 5 years old come September it has been a great project and even has an ARA UL win to its credit as well as numerous club match wins. a few 250 RBA targets.
Build information-
Action- factory M12 that has had the action face trued, new rear action hole for a 1/4"-28 action screw, D/T for scope bases comes with Harrell's dovetail bases. bolt has 3/4-oz of weight added to the cocking piece to provide better pin hit (see example cases) scope and rings not included
Barrels - 1-28" 3G Benchmark with Nevius chamber. profile 1.0 for 3" then radius taper to .850 about 3500-4000 rds. shot
1- 24" 3G Heavy reverse taper Benchmark with Nevius chamber (currently on action). profile 1.0 for 3" then radius taper from.760 to .915 about 2000 rds. shot. with lighten Harrells tuner
both barrel shoot really well. the ARA win came with the 28"
Stock- Don Stith Straightline classic originally inlet for a Falcon action. it is bedded with a steel bedding bar. bar is about 12" long. custom made trigger guard. I reposition the rear action screw so that it now has a regular 1/4"-28 screw. two 1" brass rods(removable) are behind the recoil plate rifle is about 20-lbs. custom made brass recoil plate 1' thick.
Trigger- factory M12 trigger that has been repined by me and now has about a 1.8-oz release no safety.

Miscellaneous- M.Werks bore guide with two inserts for .187 rod or. 200. extra Fring pin springs, extractors, extractor springs. I have a lot more pictures but can only put 6 for the add. I can email pictures if requested. I actually have 96.6MB file of all the work done and testing I did over the last 5 years.

Asking $1950.00 shipped within lower 48 rifle with be shipped by my FFL in a hard case. payment by check from gold members or USPS money order everyone else. if you have any questions, please PM me.

Thanks,
Lee

Some additional pictures. target 1# is of some ammo testing the extra shots on some of the bulls were to make sure it wasn't the ammo. target 2# is 56 shots 1 shot at each bull from randomly selected rounds out of 4 different lots of Lapua. bedding bar used for bedding action the chambers forward of the front action screw hole are for tungsten particle which is filled into the chambers and the covered and sealed then bedded over. the tungsten is used to help with vibration.

 

[Hi-NV Shooter]

I have a M12 that I built as a RFBR rifle this was project to see if one these rifles could be made into a competitive BR rifle. rifle will be 5 years old come September it has been a great project and even has an ARA UL win to its credit as well as numerous club match wins. a few 250 RBA targets.
Build information-
Action- factory M12 that has had the action face trued, new rear action hole for a 1/4"-28 action screw, D/T for scope bases comes with Harrell's dovetail bases. bolt has 3/4-oz of weight added to the cocking piece to provide better pin hit (see example cases) scope and rings not included
Barrels - 1-28" 3G Benchmark with Nevius chamber. profile 1.0 for 3" then radius taper to .850 about 3500-4000 rds. shot
1- 24" 3G Heavy reverse taper Benchmark with Nevius chamber (currently on action). profile 1.0 for 3" then radius taper from.760 to .915 about 2000 rds. shot. with lighten Harrells tuner
both barrel shoot really well. the ARA win came with the 28"
Stock- Don Stith Straightline classic originally inlet for a Falcon action. it is bedded with a steel bedding bar. bar is about 12" long. custom made trigger guard. I reposition the rear action screw so that it now has a regular 1/4"-28 screw. two 1" brass rods(removable) are behind the recoil plate rifle is about 20-lbs. custom made brass recoil plate 1' thick.
Trigger- factory M12 trigger that has been repined by me and now has about a 1.8-oz release no safety.

Miscellaneous- M.Werks bore guide with two inserts for .187 rod or. 200. extra Fring pin springs, extractors, extractor springs. I have a lot more pictures but can only put 6 for the add. I can email pictures if requested. I actually have 96.6MB file of all the work done and testing I did over the last 5 years.


Asking $1950 REDUCED FOR 4th of JULY $1800 for both Benchmark barrels. $1550 for current Benchmark on action barrel only (also includes original factory barrel) shipped within lower 48 rifle with be shipped by my FFL in a hard case. payment by check from gold members or USPS money order everyone else. if you have any questions, please PM me.

Thanks,
Lee

REDUCED PRICE FOR 4th of JULY also new combo price

 

[68Hoyt]

I would be interested in the 28” barrel for a m12 receiver I have

 

[Hi-NV Shooter]

I would be interested in the 28” barrel for a m12 receiver I have

Ok I will keep that in mind. as of now I am not going to part out anything unless it doesn't sell with both barrels.

Lee

 

[Coyotefurharvester]

Sent you a pm, package photos request.

 

[Hi-NV Shooter]

Sent you a pm, package photos request.

Mike sent a PM

 

[Coyotefurharvester]

Lee, sent you an email. On the whole package.

 

[Hi-NV Shooter]

Lee, sent you an email. On the whole package.

Got it and replied