SELLING Low Profile LRB stocks 4"

[Alex Wheeler]

I have finally got enough of these in that I can sell some. Until now they have only been available in my builds because I just could not get enough of them in. These are the same as the LRB from the grip back. The front end is longer and lower. In the short time these have been out they have been proving themselves. The smallest 1k match agg was shot on one, 1.6"ish. Mark Niezabitowski used one to win the 600yd IBS Nats, SOY, and a record. Jeff Locke has done a bunch of damage with the 3" version which actually predates the LRB. I will ad a couple links to rifles built on them. The main difference is tracking. These are the best I have have come up with so far. I am not going to have them made in fiberglass. Just wood laminate. I will not be taking special orders on these. I will just update this thread when I have extras available and when I dont. Email is the best way to contact me, wheeleraccuracy@yahoo.com All of these will come with the rudder installed and butt plate installed. The front rail are cut into the stock and there is a full barrel channel. All you have to do is cut in the action and bed. No there is no hole to locate the rear action screw. Thats not how you locate an action. Put the face of the trigger 13" from the back of the stock and sink it to half its diameter, minor tweaks will be needed depending on the action. $1200 shipped.

600/1000yd LG on a Low Profile Deep Creek Tracker

So I guess thats what Im going to call this new stock I am starting to use. It is a Deep Creek Tracker from the action back and a low profile 4" wide forend forward of that thats also 2" longer. These are wood laminates. This one is built on a blued chromoly Bat B that required a full timing...

forum.accurateshooter.com

New LR BR build headed to Florida

This is a cool build I just finished heading to Mark in Florida. This on is built with the Kauger BRlll action, extremely smooth action right out of the box. I didn't have to work on the timing or ignition at all. Its glued and screwed into my new stock design. Its wood laminate but Mark...

forum.accurateshooter.com

 

[Mahziar]

They look awesome

 

[Alex Wheeler]

The red/natural (top stock) are all gone.

 

[Alex Wheeler]

Blue and greys are all gone.

Will update as I get restocked.

 

[Gabe22BR]

What’s the wt on these Alex ?

 

[Alex Wheeler]

With the rudder and butt plate you can expect around 4.5 pounds when inletted.

 

[Alex Wheeler]

Green and blacks are all gone.

 

[Alex Wheeler]

Green red and blues are restocked

 

[Sandbagger1]

Do you offer them in the 3” forearm?

 

[Alex Wheeler]

Down to about half a dozen of these left.

 

[Alex Wheeler]

Do you offer them in the 3” forearm?

Not anymore.

 

[Bc'z]

Down to about half a dozen of these left.

I just got 1 in the mail

 

[Alex Wheeler]

I just got 1 in the mail

Getting clear or paint?

 

[jeff crose]

I just got 1 in the mail

You might be getting another one soon.

 

[Bc'z]

Getting clear or paint?

Paint, it's for my buddy @jvw2008 Jerry White, Shawn Williams built it.
Have to figure out something in white

 

[JFrank]

Paint, it's for my buddy @jvw2008 Jerry White, Shawn Williams built it.
Have to figure out something in white

Ghost flames always look great with pearl white. I told you about the 68 Malibu my buddy done did….

 

[Bc'z]

Ghost flames always look great with pearl white. I told you about the 68 Malibu my buddy done did….

This was a picture I received...
More freakin airbrush work if his other idea don't work out.
Jerry did install aluminum rails on the front, he's pretty handy in the wood shop.

 

[Bill Norris]

This was a picture I received...View attachment 1543715
More freakin airbrush work if his other idea don't work out.
Jerry did install aluminum rails on the front, he's pretty handy in the wood shop.

U r da Man. U can handle it no doubt.

 

[JFrank]

This was a picture I received...View attachment 1543715
More freakin airbrush work if his other idea don't work out.
Jerry did install aluminum rails on the front, he's pretty handy in the wood shop.

That will look amazing !

 

[Alex Wheeler]

These are back in stock.