Looking for info. on action threads

[omega1]

I'm sure this must have been asked before but I can't find it anywhere. I'm looking for the action thread specs for all the common bolt action rifles. Remington, Winchester, Ruger, Tikka, Sako, Savage, etc. Also some of the more common benchrest actions would be great information. What barrels can be swapped with minimal hassle from one brand to another?

 

[Dusty Stevens]

You cast way too wide of a net. Bat and kelbly barrels fit other bat and kelblys. Their specs are on their websites

 

[Kurz]

Here is a link to some of the more common threads:

http://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/8671075902/p/1

Drawings and descriptions.

The Frank De Haas book has most of the actions.

 

[Doug Beach]

There’s a handful of actions where you have a good chance of swapping barrels from one of their actions, to another, if that floats your boat. Brand to brand? Not so much.
If it’s a good barrel, leave it on the action it’s working with. If it’s not a good barrel, use it to prop up your tomatoes.

 

[jdh47]

Frank De Haas book, "Bolt Action Rifles" gives all the information on bolt actions from military to sporting. Most custom makers will have the thread specs on their website.

 

[omega1]

Thank you antelopedundee. Very informative exactly the type of in formation I was looking for.
Thanks jdh47 looks like I need to get Frank De Haas' book.

 

[omega1]

Thanks for the link Kurz great info.