Loh rest

[Bodkin84]

I just purchased a jj loh rest. It was disassembled when I got it, the head off and (2) bearings and washer in the box. Anyone tell me how the bearings and washer go? Or post some pics? Thanks

 

[Dusty Stevens]

Yes post some pics

 

[Dusty Stevens]

If its what im thinking the washer goes between the bearings and then slip over the post. Then you loosen the locking screw that goes into the groove on the post, slide the top in and its done.

 

[Bodkin84]

Ok guys here’s the pics… how does it go together?

 

[LRPV]

Those are aftermarket add ons. Not original.

 

[Bodkin84]

Yes post some pics

Pics added

 

[243Lapua]

Get in contact with member Chris Covell. I'm pretty sure he can help you.

 

[Thud]

Those 2 bearing plates are not original looks to be an owner add on.
The teflon washer goes between the base postholder and the mariners wheel.
With a light coat of grease.
It's quite. simple.
Enjoy the rest

 

[Mulligan]

SELLING - Thrust Bearing for Elevation adjustment forFront rest $24 Please PM if interested

I did this upgrade for my own rest Huge improvement, especially if you have a heavy rifle. The bearing goes under the mariner's wheel and greatly reduces friction. This allows you to change elevation to go up or down the range more quickly and easily. Works on Sinclair, Bullets, and similar...

forum.accurateshooter.com

I remembered a thread from a few years ago on installing bearings under the wheel.

You might find what your looking for here.
CW

 

[swd]

What Thud said..