Load Data for 100gr DEWC 38spl using Bullseye

[Brennanc]

I came across a box of 100gr cast DEWC bullets for 38spl. Im using bullseye powder and having a hard time finding data. Any suggestions?

 

[fullersson]

Hodgdon recommends 4.3 to 4.8 grains for a 110gr bullet using Titegroup, which according to Hodgdon has about the same burn rate as Bullseye. I would start at 4.0 grains of Bullseye and go from there. This load is for a 38 special. Hope this helps.

 

[jonbearman]

Why bullseye. I would try 231 winchester.Bullseye is filthy powder like unique and hp-38.They work good but they are dirty burning powders.