Leupold Quick Release Rings

[BZR]

I am considering the Leupold Quick Release rings for my F-Class rifle...

Any Comments/Suggestions?

Cheers
BZR

 

[Delphinus]

I am considering the Leupold Quick Release rings for my F-Class rifle...

Any Comments/Suggestions?

Cheers
BZR

I use the Leupold 1" QRW Series Rings and they are very good in keeping POI vertically, the horizontal can change slightly if you don’t apply all times the same force but the variation if so small that probably you only noticed it using a collimator.

Because they are steel rings the weight is considerable but I recommend them.

Miguel

 

[BZR]

Thanks Miguel

 

[RJinTexas]

BZR, I've used both 1" and 30mm QRW rings for years on scopes that I move around a lot to use on different rifles. I've had experienced satisfactory results and never had a problem returning to POA. I simply record the click adjustment needed to return to zero on a given rifle. I use one piece picatinny bases on almost all my rifles this allows me to move my scope without loosening the rings or affecting the x-hair level. Just make sure that both of the bottom half of your rings bases are push fully forward so that the lugs make solid contact with the front of the slot on your base when you originally mount the scope in the rings and push it fully forward evertime with slight pressure before you tighten the levers down when you replace it back in the picatinny base and you'll have no problem returning to POA.

Regards
RJ