? Length of 22 Lr Barrel ?

[Darkside]

Howdy all, hope everyone's well.

I have a Rem. 521T in a 22Lr.
I picked up a Bartlein..9000 str. From Chris 27" My gunsmith and I are wondering what length to cut it.
Will be using it at our range club in made up competition and maybe 50/50 matches just to have Fun.
Is there a preferred optimum length?
Thanks David

 

[TRSR8]

If your smith does not know how to do this you’re behind the 8ball right from the start.
Most good guys will slug it and cut it at the tightest spot for the crown, likely 24”-26”.
Dedicated RF smiths are usually your best bet.

 

[Rob01]

Anywhere in the 20-26” range will be fine for your use. Do you want it long or wanting it shorter?

 

[ASbobcat]

Will this be used with iron sights?

If so, longer sight radius is more accurate, leave as close to 27in as possible.

Maximum velocity in 22LR is 16in. If you're using a scope, cut it there for stiffness.

The worst of either choice would be 20in, which is no-mans land, less sight radius and less velocity/stiffness.

 

[Rob01]

20” is no man’s lands? lol 20” will work just fine. You also don’t lose a ton of velocity going longer than 16” and you actually get better es/sd numbers.

 

[ASbobcat]

20” is no man’s lands? lol 20” will work just fine. You also don’t lose a ton of velocity going longer than 16” and you actually get better es/sd numbers.

LOL? I recognize genius when I see it.

 

[Rob01]

Well I have had and used a 16”, 18”, 20”, 22”, 23” and 24” and shot them out to 550 yards so yeah I have sent some rounds down range and that whole max speed at 16” so don’t go longer is BS.