It looks like well lit retail store shelving with a three press and bench primer display.
Enjoy !
Enjoy !
LED lights over the loading bench, I can see!!!!!
- Thread starter Mulligan
- Start date
TheOtherZilla
Pull my finger
Yes they are!
Two months ago I finished installing / converting everything to LEDs. In the shop and garages where I had two tube 4' fluorescent fixtures I now singles with one LED. The only ones with two are the recessed lighting in the laundry and rec room.
I had single 4' over my reloading bench and a 18" under counter fixture behind the fascia on the shelf above it. After installing the T8 LED I didn't need the 18.
Bill
Lowes has the Utilitech 48" complete unit for less than $50. I have a pair of Accu-Lab electronic scales that I built a sturdy bench for and moved into my inner sanctum. With the Fluorescents the readout never stopped dancing. These things are the best!!
Mulligan
Silver $$ Contributor
No bench primer.......That's my barrel vice
Mulligan.
I hate reading these threads. Now I want to install them also.. I saw them at Costco yesterday and had to have them. I can now see how dirty my press is.....
I bought 20 of these ( T8, ballast bypass) when they were a buck cheaper w/ free shipping.
https://www.earthled.com/collection...llast-bypass-dlc-qualified?variant=4099400900
Bill
Yeah, I put LED tubes into the once-fluorescent fixtures I installed in my basement work area a couple winters ago. Realizing I needed a bit more light on my scale & trickler counter area under the shelves on the wall, I found a decent LED strip light I plugged into a remote switch thingy (so I don't have to feel around for its toggle) to mount under the shelf, right above the scale. Old eyes appreciate the extra photons w/o the heat older technology produced!
Ok.. went out to Home Depot, found a LED overhead light on sale, bought it, put it up and then pulled out the skill saw and made these mounts, i don't really have much in wood working tools, so i had to make do with what i had.. i am pleased with them.. nice thing is that i can move them off the reloading table to make room for case prep and other things. and i can use C clamps to keep the presses from moving around when they are in use..
Last edited:
CaptainMal
Silver $$ Contributor
Same thing, only different. Got rid of those fluorescent tubes.
Mulligan
Silver $$ Contributor
Cool blue lights like my neighbor has on his Harley!
6MMsteve
Gold $$ Contributor
Led's at Lowes 65.00 for 36 or 48 that's what I have they are great. bright and will never go bad
Now all you need are some line noise filters...
Led is the only way to fly now! By the way, your RL22 and 25 are backwards
It might be that way because that is the one that he reaches for first the most!Led is the only way to fly now! By the way, your RL22 and 25 are backwards
Mulligan
Silver $$ Contributor
You are correct!Led is the only way to fly now! By the way, your RL22 and 25 are backwards
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.