Lead wheel weights SOLD

[roc_my_tims]

Have 2 good sized buckets $1.75 per lb. Buyer pays actual shipping. Usps flat rate boxes make most since.

 

[AlienRayGun]

Are the steel and zincs removed?

 

[roc_my_tims]

Are the steel and zincs removed?

Full transparency im not sure, i was told its all lead ready to cast. No matter what i was planning to add in some extra weight to make up for clips or anything.

 

[AlienRayGun]

I'd pass a magnet over the top of the buckets.

If none are steel, at the top of the bucket, it's probably low count. But if you do pick up a few with the magnet (not the clip part), that indicates a potentially high ratio. It might be nice to separate the steels out.

Purchaser will have to do a melt/specific gravity test for the zinc.

Adding extra is a good idea, as long as you're adding lead and not more steels or zinc, haha.

 

[brokeasajoke]

I'd pass a magnet over the top of the buckets.

If none are steel, at the top of the bucket, it's probably low count. But if you do pick up a few with the magnet (not the clip part), that indicates a potentially high ratio. It might be nice to separate the steels out.

Purchaser will have to do a melt/specific gravity test for the zinc.

Adding extra is a good idea, as long as you're adding lead and not more steels or zinc, haha.

Cutter snip test works pretty good.

 

[roc_my_tims]

tested a good amount of a bucket with magnets, only clip is catching onto magnet. seems to be mostly if not all lead.

 

[AlienRayGun]

Sounds good.
I think around 60lb fits in a medium, with proper padding, and protection, and 20-25lb in the small.