Le wilson for 6ppc

[Lkwebb]

I'm getting my list together for when I can get my arbor press. I have not chosen a arbor press atm but I'm posting a pic of what dies etc I'm planning on purchasing...
Recommendations on anything else....

 

[DngBat7]

May be a Harrell’s bushing die. Semi custom fit to your fire-formed brass. Which you may have to, the one your looking at is out of stock.

 

[jimmymac]

That seater die will be fine. Get in touch with Harrell’s about your sizing die and arbor press. You can score both for a good price if you pay cash.

They will need three pieces of once fired brass to match the die to your chamber.

 

[LCazador]

I'm getting my list together for when I can get my arbor press. I have not chosen a arbor press atm but I'm posting a pic of what dies etc I'm planning on purchasing...
Recommendations on anything else....

I would recommend a Redding small base bushing full length die but Harrells is also a good choice. The Redding will allow you more versatility if you use it to reload for a factory rifle. What Harrells does is they take meaurements of your brass and then they will send you a corresponding die that's out of their inventory. If you want a true custom sizing die bite the bullet on the price and get a Neil Jones custom die. You will never look back. I'd recommend the Wilson inline seater with the micrometer top on it. One more recommendation is buy a Redding 6PPC competition shell holder set to set a proper bump.

 

[FNSafari]

I've had multiple 6ppc barrels with two diff reamers and the regular redding FL busing sizer has worked fine for me.

 

[LHSmith]

Harrell's. There is no SAAMI spec for the 6 ppc and perhaps more reamer variations than any other cartridge. Getting stuck with the wrong sizer is not conducive to shooting well.