WANTED LE Wilson Chamber Die 6 Dasher

[Po' Man's Precision]

I figured i would try my luck on here first before buying new.

I'm looking for a LE Wilson 6mm Dasher Chamber style seating die and FL bushing sizing die.

Thanks for looking and have great day.

 

[Po' Man's Precision]

Bump

 

[smoooth]

FYI: if you’re using the longer Norma 6 Dasher brass, the die neck will need to be cut deeper in the dies (unless Wilson made the change now) or trim the necks on the brass.
I cut my die deeper to take advantage of the case capacity.
Good luck!!

 

[Po' Man's Precision]

FYI: if you’re using the longer Norma 6 Dasher brass, the die neck will need to be cut deeper in the dies (unless Wilson made the change now) or trim the necks on the brass.
I cut my die deeper to take advantage of the case capacity.
Good luck!!

Not real sure which reamer was used. It's a new cartridge to me. I know it was not the Alpha reamer. It's a Shelin barrel cut with their in-house reamer.

 

[smoooth]

Not real sure which reamer was used. It's a new cartridge to me. I know it was not the Alpha reamer. It's a Shelin barrel cut with their in-house reamer.

Most likely NOT cut for the longer Norma brass then, but you could easily call Shilen and ask the question.

Good luck with your new Dasher!!

 

[Po' Man's Precision]

Most likely NOT cut for the longer Norma brass then, but you could easily call Shilen and ask the question.

Good luck with your new Dasher!!

Thank ya! I'm sure it will be a blast. I already have a 6 BRA and it's a shooter .3 moa all day .2 when I do my job. But it's a Wilson blank turned by @urbanrifleman

 

[Longmire]

PM sent.

 

[Strap]

I figured i would try my luck on here first before buying new.

I'm looking for a LE Wilson 6mm Dasher Chamber style seating die and FL bushing sizing die.

Thanks for looking and have great day.

I can make you a custom with one of my reamers, or if you have one yourself.

 

[RussellJ]

I figured i would try my luck on here first before buying new.

I'm looking for a LE Wilson 6mm Dasher Chamber style seating die and FL bushing sizing die.

Thanks for looking and have great day.

SOLD - I have an "As New" L.E. Wilson 6mm Dasher Full Length Sizing Die. SOLD

 

[Po' Man's Precision]

I can make you a custom with one of my reamers, or if you have one yourself.


View attachment 1625832View attachment 1625833

How much do you usually charge? I unfortunately do not have my own reamer. I do know it is not the Alpha nor the Norma reamer.

 

[Po' Man's Precision]

I have an "As New" L.E. Wilson 6mm Dasher Full Length Sizing Die. $75 Shipped.

View attachment 1625877

It is the bushing die correct?

 

[RussellJ]

It is the bushing die correct?

Yes, it is.

 

[Strap]

How much do you usually charge? I unfortunately do not have my own reamer. I do know it is not the Alpha nor the Norma reamer.

I charge $350 shipped with unit
All seaters are coaxially indicated in the seating stem raceway and chambered just like our barrels. As straight and in-line as you can build one of those seaters