Lawton action / scope

[wi50]

Anyone know how high of rings I will need for this:
Lawton 7500 dual port action, Lawton 20 MOA steel base and I am putting a Nightforce 8-32X56 NXS on top. It's going in a Richards Lowrider stock and will be a fairley heavy barrel contour. No parts here yet but shortly, probably mid Dec the little brown truck will bring it's joy. I'd just like to see if I have rings around or if I need to change an order on some.
Thank's

And the debate goes on 6br or 6 dasher???

 

[Rustystud]

Please build it in a 6BRX or Dasher. You will be much happier in the long run.

Rustystud

 

[Mntngoat]

I have a 6 BRX on Bat SV and if I could do it all over again I'd do a 6 x 47 Lapua. Something about that short neck on the 6 BRX that doesn't sit right with me.

Anybody interested in a no turn neck Lilja #6 8-twist fluted barrel with less than 200 rounds through it, with custom dies and brass?
Chambering by Mike Bryant.

Michael

 

[MarkS]

wi50,

I have a 6BRX on Richard's LowRider. Gun #3 http://www.richardscustomrifles.com/customergallery1.htm. Richard did all the work, It's on a Bat M action. If weight is not a problem use the Burris ZEE rings Xhigh should work. Richard came up with the lowRider, so I could make it down to 17 lbs for IBS 600 yds benchrest, it's 16.9 lb. This gun started as a 20 lb heavy 6BR. Then rechambered to 6XC, & shot IBS record Hg 4 target score agg 203. But the 6CX never shot groups to please me. I rebuilt it to a LG and shoot both classes with it. It has done very well this year, 7 1st place aggs 3 second place & a pending HG single target score record 54 with a 1.9" group. The 6BRX has done very well for me.

Mark Schronce