Laminate Bench rest stock

[BrettNC]

I have a couple of Boyd’s pro Varmint stocks and I do like them but I’m looking for a true wide forend bench rest stock.

 

[McStocks]

Bob is correct; Darrel Landolt is a true craftsman!
Steve

 

[GRV]

Is Bill still making stocks?

No, he hasn’t for several years. He is still supplying the fibreglass models ST1000 etc.

 

[chootem]

For someone who has no plans to ever compete in any bench rest shoots, but shoots ELR bench rest exclusively would you have any suggestions I might try out not breaking the bank? I have never tried one and while I like my MDT ACC chassis, bipod and rear squeeze bag I think I could likely squeeze some additional accuracy with a bench rest stock and perhaps a nice adjustable front rest? Thanks

 

[spike-55]

BC's has a new source I think in Arizona/New Mexico way??? He posted some pic's that were fantastic work on the stocks!!! 'Course his paint skills do enhance damn near ANYTHING!!!!!!! @Bc'z
stan

 

[Bc'z]

BC's has a new source I think in Arizona/New Mexico way??? He posted some pic's that were fantastic work on the stocks!!! 'Course his paint skills do enhance damn near ANYTHING!!!!!!! @Bc'z
stan

Thanks Stan, I was asked about my coffee tumbler in the pits today.
@Southwest Action Works Dennis Ray

 

[chootem]

While I'm at it....for someone using a chassis/bipod/squeeze bag off a sturdy but not concrete bench....what if any improvement would you expect to possibly see by going to a benchrest stock/front rest/rear bag-Protector rabbit ear type setup? This is simply a want vs a need thing....always wondered, but have not had the chance to try a setup like that to feel it out. Thanks all

 

[urbanrifleman]

While I'm at it....for someone using a chassis/bipod/squeeze bag off a sturdy but not concrete bench....what if any improvement would you expect to possibly see by going to a benchrest stock/front rest/rear bag-Protector rabbit ear type setup? This is simply a want vs a need thing....always wondered, but have not had the chance to try a setup like that to feel it out. Thanks all

I shoot the same groups from the chassis squeeze bag as I did from a rest.

The rest is easier. Also the rest shooting did nothing for my other shooting.

 

[chootem]

I shoot the same groups from the chassis squeeze bag as I did from a rest.

The rest is easier. Also the rest shooting did nothing for my other shooting.

Very good thanks. More of a want than a need...or a question and itch I have not scratched. I keep watching these vids with bench rest setups sure looks neat, but just wasn't sure what it might add to my experience. Thanks all

 

[urbanrifleman]

Very good thanks. More of a want than a need...or a question and itch I have not scratched. I keep watching these vids with bench rest setups sure looks neat, but just wasn't sure what it might add to my experience. Thanks all

REM 700 SA Revolution 3" Benchrest w/ Aluminum Bedding Block

Laminated benchrest rifle stock with 3 inch forend and alumium bedding block for f class and benchrest stooting

theurbanriflemanstore.com

I have these available in high gloss and satin. They are Remington 700 foot print compatible. I have been very successful with these and people like them. They shoot quite well with no bedding. I also have the satin.

This is the last of the glosstocks they are not making them anymore.

 

[Ranger188]

While I'm at it....for someone using a chassis/bipod/squeeze bag off a sturdy but not concrete bench....what if any improvement would you expect to possibly see by going to a benchrest stock/front rest/rear bag-Protector rabbit ear type setup? This is simply a want vs a need thing....always wondered, but have not had the chance to try a setup like that to feel it out. Thanks all

I shot off a bipod and rear squeeze bag for years.
Now I have a couple bench rest rifles also.
I shoot those off a Seb it does make a difference, much more stable and adjustments are simpler and
smoother.

 

[spudgun]

I have a couple of Boyd’s pro Varmint stocks and I do like them but I’m looking for a true wide forend bench rest stock.

You can add a front piece to the Boyds stock and also make a bag rider easily.

 

[itchyTF]

If you like thumbholes.

 

[chootem]

I shot off a bipod and rear squeeze bag for years.
Now I have a couple bench rest rifles also.
I shoot those off a Seb it does make a difference, much more stable and adjustments are simpler and
smoother.

Concrete bench?

 

[USMCDOC]

If Don Stith is in business he makes what you want.

Don passed away, but a fella bought his equipment and is making them @Hi-NV Shooter knows the contact info.

 

[JMayo]

Is rotex still out there ? The 22 stocks are nice.
C&c machined.

Randy Owens Rotex Stocks

I want to order a stock from Randy. I can only find him listed on Facebook. I don't have Facebook. Anyone know how I can get a hold of him either by email or preferability by phone? I understand it's going to take 4 or 5 months to get one.

forum.accurateshooter.com

 

[Bc'z]

Is rotex still out there ? The 22 stocks are nice.
C&c machined.

Randy Owens Rotex Stocks

I want to order a stock from Randy. I can only find him listed on Facebook. I don't have Facebook. Anyone know how I can get a hold of him either by email or preferability by phone? I understand it's going to take 4 or 5 months to get one.

forum.accurateshooter.com

Alive and well. I've painted 2 Rotex for Greg Brooks in as many months.

 

[10XSHOOTER]

Try Paramoor gunstocks in England. Gun-stocks.co.uk
Stephen Parker email: sp95270@gmail.com
I just got a Birch laminate, for an Anschutz .
Great looking stock. sanded to 120 grit