bichettereds
Silver $$ Contributor
I just went through my notes and found a couple barrels that aren’t terrible, but have lost enough of their edge (or never had it) to deter me from likely ever putting them back on. However, they’re still very good and I’m sure someone could find some use in them.
Barrel: K7
Mfg: Krieger
Config: LV 6mm .237 4 Groove 14 Twist
Round Count: 916
Last time I shot this one I shot a .2553 Grand Agg with it which was good enough for 3rd out of 21 shooters at a registered NBRSA match.
Barrel: K9
Mfg: Krieger
Config: LV 6mm .237 4 Groove 13.5 Twist
Round Count: 1130 (Re-crowned at 1082)
The last time I shot this one I shot a .3083 200yd agg with it, finishing 16 out of 68 in some tough conditions at a WBC Qualifier.
Both barrels are 21.5” and weigh 5lb 2oz.
Both were chambered with the same JGS .268nk 6ppc (1045, 1.510-.040fb) reamer by the same machinist.
I took some pics of the bore in the throat area but I’m embarrassed to say I forgot to make note of which is which before I put the barrels away. Pics of both are attached. Both bores still look good.
$175 shipped for one. $325 shipped for both.
One caveat… I will not be able to ship them until Tuesday, January 6th.
Barrel: K7
Mfg: Krieger
Config: LV 6mm .237 4 Groove 14 Twist
Round Count: 916
Last time I shot this one I shot a .2553 Grand Agg with it which was good enough for 3rd out of 21 shooters at a registered NBRSA match.
Barrel: K9
Mfg: Krieger
Config: LV 6mm .237 4 Groove 13.5 Twist
Round Count: 1130 (Re-crowned at 1082)
The last time I shot this one I shot a .3083 200yd agg with it, finishing 16 out of 68 in some tough conditions at a WBC Qualifier.
Both barrels are 21.5” and weigh 5lb 2oz.
Both were chambered with the same JGS .268nk 6ppc (1045, 1.510-.040fb) reamer by the same machinist.
I took some pics of the bore in the throat area but I’m embarrassed to say I forgot to make note of which is which before I put the barrels away. Pics of both are attached. Both bores still look good.
$175 shipped for one. $325 shipped for both.
One caveat… I will not be able to ship them until Tuesday, January 6th.









