• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

krico / tradewinds model k-607

chuckshooter

Silver $$ Contributor
does any body know anything about these rifles? I've got one chambered in 22-250 that I inherited from my dad. The action looks like something that could make a nice little varmint rig, like maybe a 20 br. this one has the double set triggers. is it a copy of a mini mauser? sweetish mauser?


20180803_133915 (640x360).jpg 20180803_134316 (640x360).jpg
 
Nice little rifles, I had one in 22 hornet w/ a double set trigger and I have a bare action in the safe with a single trigger. Considered higher quality similar to Anschutz in heritage I suppose. They have a dual cam on the back of the bolt that doubles the cocking cam surface and are slick little actions.
 
I know this is an old thread, my father-in-law has one of these that's missing the extractor. He asked me if I could make one, is there any chance you've still got the rifle, and if so, would you mind taking a photo of the extractor when removed from the bolt? It would be much appreciated, and would make my task of machining a new extractor much easier.
 
I still have a bare action and a 222 Rem Mag Krico. I’ll take a few pic in the next day or so for you. PM me your email or cell# and I can text/email you a couple pics.
 
The extractor is similar to a sako or m16 extractor, also to the extractor on coopers. I'll look at it closer when I get a moment
 
I hod one years ago in .222mag. I won a lot of offhand money with it. Left a guy talk me out of it. Bad mistake. I have seen them at gun shows for prices that floored me. In the 2000.00 range.
 
I'm not expert on extractors but, I think this is sako style. measurements are length .521 width .107. if you google sako extractors, you will see some very similar. here's a couple of links, discontinued but pictures



good luck
 

Attachments

  • 20210409_090830.jpg
    20210409_090830.jpg
    230.7 KB · Views: 9
I'm not expert on extractors but, I think this is sako style. measurements are length .521 width .107. if you google sako extractors, you will see some very similar. here's a couple of links, discontinued but pictures



good luck
Thanks, that's a huge help! I should be able to make one pretty easily.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
164,876
Messages
2,185,556
Members
78,559
Latest member
Ironkettle
Back
Top